DIY Christmas Card Tree {card display/holder}

Christmas cards have been arriving in the mail! It’s the best time of the year for checking the mail. Walking to the mailbox in cold temps, anticipating ‘good tidings’ and walking back into the house with a warm heart. Thoughtfulness and “Merry Christmas” delivered to our mail box. It’s just one more part of Christmas giving that makes my days merry and bright! We have two ways for displaying Christmas wishes. One is something I put together using scrap wood and trim pieces: 

DIY Christmas Card Tree

How I made it:

I gathered the scraps of moulding we had lying around, a 1×3.5 and a 4×4 scrap block. My 1×3.5 is about 21 inches long, the 4×4 is about 6 inches long. Adjust measurements for what fits your scrap wood.

DIY Christmas Card Holder

I placed pieces on my 1×3.5 to get an idea of where things would go. I often use FrogTape as a measuring tool and in this case, I used it to evenly space my trim pieces by using them as a guide between trim pieces. I used the 1.88 in. width. I also left a small space above the “top” trim piece to allow room for gluing on a star.

DIY Christmas Card Holder

I measured my trim to fit the 1×3.5 piece for the top of my “tree”.

DIY Christmas Card Holder

I cut my pieces at a 45 degree angle.

DIY Christmas Card Holder

And lined up each piece for cutting…

DIY Christmas Card Holder

and cut each piece at a 45 degree angle.

All pieces are glued using Gorilla Wood Glue and clamped as well as screwed into place.

DIY Christmas Card Holder

The 4×4 was glued and clamped  to the bottom {back} and serves to make the Christmas card display free standing.

DIY Christmas Card Holder

Everything got a coat of milk paint (General Finishes “basil”) and glaze with a dry brush with a spritz of Krylon Glitter Blast. {front and back} FrogTape was used to keep the 4×4 block of wood from being painted (I considered staining the wood block but see instructions below for my change in plans).

I spray painted small clothes pins and a wooden star.

Next I hot glued the clothes pins into place, staggering so cards won’t overlap by too much when displayed {FrogTape containers are great for storing glue sticks and keeping craft supplies organized}…

DIY Christmas Card Holder

and the star on top.

DIY Christmas Card Holder

My plan was to wrap the base using jute twine. But I’ve misplaced it, so I used a pretty wool yarn I had on hand, securing with hot glue.

DIY Christmas Card Holder

It’s such a cute way to display Christmas cards and pictures of my nieces and nephew:

DIY Christmas Card Display

a little Christmas card vignette display…

DIY Christmas Card Holder

Doubles as a candle holder: When I don’t have anything to display, I can flip it to the back side, add a votive holder and candle…

DIY Christmas Card Holder

Quick and Easy DIY Christmas card/photo display: Our other Christmas card/photo display is a tension rod. I simply sewed a sleeve, added curtain rings with clips. It’s been displayed in our window frame, on a small book case and in a (non working) fireplace opening. Here’s a picture from last year:

DIY Christmas Card Holder

I love this idea from Family Fun too – a tomato cage Christmas card holder…

tomato cage Christmas card holder

for more creative ideas, see my HomeTalk Christmas Card Display clipboard

HomeTalk christmas card photo display clipboard

Which do you prefer? How do you display your Christmas cards? If you have a do-it-yourself Christmas card holder, feel free to leave a link in the comments {and I’ll add you to my HomeTalk clipboard}. 🙂

Sharing here:

Home Stories A2Z

*This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my experience. Results may vary. 

FrogTape Blog Squad

His & Hers painted pillow covers

His & Hers Pillow Covers

I shared my painted upholstered chairs

Christmas sitting room with painted striped chairs

I also liked that the Serena & Lily chair {my inspiration for the stripe} had matching accent pillows.

Serena and Lily Bark Miramar Racing Stripe Chair

I just so happened to have 2 matching pillow cases on hand. What are the chances? I have had them just sitting in a basket in my craft room along with the other supplies. I love when DIY project was meant to be! {Chairs are actually a light grey and the pillows are a linen color…but they look so well together!}

His and Hers Pillow Covers tutorial

Materials:

  • FrogTape
  • two pillow covers
  • latex paint
  • acrylic craft paint
  • stencils

FrogTape-stripe-pillow-cover-tutorial

I measured the width of the stripes on the chairs and using FrogTape,I created the same stripe on the front of my pillow covers. I did insert a piece of cardboard to prevent paint from soaking through the back side. I filled in my stripe with the brown latex paint that I used on the chairs. I removed the FrogTape and let them dry. Then simply used stencils to spell out “His” and “Hers” (using an acrylic craft paint). I’ve read that you can set the paint with a warm iron.

I also liked that some of the fabric shows through for a worn look.

painted pillow cover

Awe…His & Hers

FrogTape painted striped Hers pillow

Now my chairs are complete! Christmas in the sitting room coming soon! 🙂

Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

*This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my experience. Results may vary. 

FrogTape Blog Squad

Painted Upholstered Chair Tutorial {before and after}

Painted upholstered chairs – story of an unplanned DIY.

Does your DIY ever go like this: I started my day with big plans to finally sew the curtains in the family room. In order to do so, I needed to clean off the dining room table which was piled with boxes filled with ornaments and holiday decor and other junk from the shuffling around, rearranging and decorating {because of course the table in my craft room is piled high with an unorganized cluttered mess that also needs cleaned}.

DIY painted upholstered chair tutorial

Of course clearing the dining room table meant decorating for Christmas which lead me to the room right off the dining room that we’re currently calling the “sitting room”. So, in order to sew curtains for the family room, I had to clean the dining room which meant decorating the sitting room and in there were these chairs.

These $6 thrift store chairs. I loved the color and pattern. But I have had a difficult time with orange, fuchsia and olive green colors. Love them. But they don’t work in our home. I gave them a chance, but not even in our eclectic home. I considered slipcovers but I am decorating this room right now. No materials or time for slipcovers.

{before}

chair before

And I had the brilliant idea to paint them. Right then. That minute.

I had seen the upholstery painting tutorial at Hyphen Interiors in 2011. Loved it. Left an impression. Very inspiring.

I also knew I had most materials on hand. Paint! Everything except the fabric medium. I’ve looked at the bottles for sale at Michael’s in the past {for painted curtains} and knew they weren’t cheap. I was also still in my pajamas and on a mission. Sewing curtains, remember?! But these multi-colored chairs were an obstacle.

DIY girls thoughts: No fabric medium. No budget. No desire to run to the store. Lots of leftover latex paint. The only one who really sits in these chairs is the cat. So for now…if painting doesn’t go right, I can still slip cover them at a later date. GO FOR IT!

I found a left over can of Ralph Lauren paint that I hated working with as it was super watery. Perfect! I watered it down even further with water. I didn’t measure, just created a consistency that was still able to hold to the paint brush but watery enough to be absorbed into the textured fabric of the chairs. I used a 2.5 inchPurdy brush.

I gave the chairs a good cleaning, getting up all of the cat hair (FrogTape works great as a cat fur remover).

And I just started painting. My mixture of latex and water had amazing coverage.

I also taped off the legs using FrogTape.

painting upholstered chair

Sometimes I had to swirl the brush for coverage, then followed up with a straight brush stroke.

painting upholstery

And worked my way along the bottom edges, up the side, around the back, in the creases of the attached cushions and finished by painting the seat back and cushion.

painting an upholstered chair

I took a few breaks and a bigger one between the painting the two chairs. The Paintbrush Cover was perfect for keeping my paintbrush from drying out. It creates an airtight seal during usage. Simply place the brush in the cover and close the lid. After my break, I simply opened the cover, removed my brush. It was like I never stopped painting! {Thanks to Salvatore of the Paintbrush Cover for the gift…definitely something that’s going to get a lot of use around here. If you paint a lot…visit the link above to purchase a few for yourself. Definitely useful and convenient! 2 must have DIY paint tools to have on hand: FrogTape and the Paintbrush Cover.}

The Paintbrush Cover

One coat. It dried fairly fast. I removed the FrogTape which perfectly protected the wooden legs. Who even noticed those pretty legs with that crazy printed fabric before? Discovery: She has legs with beautiful carved detail!

removing FrogTape

The texture which was lost in the busy pattern…

before

upholstery before

now shows the quilted pattern with a solid color…

after

painted upholstery after

SO PRETTY!

And before you ask, yes…without the fabric medium, my chairs are rough. They have a vinyl look and feel. Since the paint is watered down…it’s not going to crack or chip or anything. The paint is absorbed into the fabric. I would recommend NOT skipping the fabric medium and to use the recipe shared by Hyphen Interiors. However…if you find yourself in a DIY emergency like me and aren’t particular about a sort of vinyl look/feel. And you have to do something or your entire Christmas decorating is going to be a big fail and you’ll never move on to the project that you planned to complete in the first place…I must tell you, I love these chairs now. Forget the slipcovers.

I knew I wanted to do more than just have a set of solid light grey chairs. My inspiration:

Serena & Lily Bark Miramar Racing Stripe Chair

Serena and Lily Bark Miramar Racing Stripe Chair

Of course I know that my chairs aren’t the same shape. They’re slender girls with long legs. But that stripe. I love that stripe. Not quite a knock off or copy cat project, but it’s what inspired my next steps…

I found the center of the chair and using FrogTape, created a stripe down the middle. I was sure to burnish the edges where the tape would meet paint. And using  leftover {watered down} brown latex paint, I painted in my stripes from bottom of the front of the chair, over the cushion, up seat back and down the back of the chair.

FrogTape stripe

I removed the FrogTape while the paint was still wet, pulling away from the wet paint. I did take a wet paper towel to carefully wipe away wet paint where a tiny bit seeped under the tape due to the texture of the fabric. See – it’s a good thing I have that vinyl-ish finish!

Removing FrogTape Stripe

Amazing transformation, right? Love it!

striped painted upholstery

Now I’m happy with my $6 chairs.And I was able to decorate the sitting room for Christmas.

See more Painted Upholstery Chair pictures in the sitting room mini makeover. 

painted upholstered chair tutorial

His & Hers painted pillow covers

painted pillow cover

{tutorial}

His and Hers Pillow Covers tutorial

I was able to get the dining room table cleared off and decorated and the clutter put away. (okay…for real, some of that was shifted to the craft room table which is dangerously close to an avalanche. Shhhh!)

I still haven’t sewn 6 of the 8 family room curtain panels. {Remember the no sew ruffled ombre tree skirt and the sewing machine being at the repair shop? One of these days I’ll get those curtains done. You don’t remember that I’ve had the fabric since June, do you?}

Perhaps another day, I’ll have a DIY plan that will go according to plan.

Joining the party here:

TDC Before and After

shabby creek cottage Beneath My Heart

 

Don’t miss a thing!
Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

*This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my experience. Results may vary. 

FrogTape Blog Squad