2 DIY Tire Flower Planter Projects

I recently needed new tires (don’t even look at the tread…it was bad)! This is a great idea for upcycling! The July Challenge for Lowe’s Creative Ideas is Outdoor Art so I headed to Lowe’s for some supplies. 

DIY Tire Flower Planter Tutorial

tire flower planter tutorial at DIYShowOff

My summer home tour revealed a sneak peek of a super easy DIY outdoor decorating/planter. DIY tire planter…

barn party patio

See it?

party patio

There on the wall? Isn’t it happy?

tire flower planter tutorial

Materials:

  • Old tire
  • Valspar spray paint (color is Exotic Sea)
  • potting soil
  • flowers.
  • I already had some leftover fabric weed barrier from the pallet herb garden and some packing peanuts on hand.
  • Optional: chain and s-hook.

I gave the tire a good scrubbing with soap and water and let it dry. 

upcycled tire planter

Then gave it a couple of coats of spray paint (paint + primer). Let dry. 

tire flower planter tutorial

Next we used a  (correction) 1/2 inch drill bit to drill 6 holes into the ‘bottom’ of the tire for drainage. This takes a sharp bit and a lot of pressure (as in I tried but had to have my husband take over). It also produces a little smoke. 

How to make a tire flower planter @DIYShowOff

Then lined the bottom with a piece of fabric weed barrier and a few styrofoam packing peanuts.

How to make a tire flower planter @DIYShowOff

Time to plant! 

I used this arrangement for the wall mounted tire planter…

How to make a tire flower planter @DIYShowOff 

and these for the hanging tire swing flower planter:

How to make a tire flower planter @DIYShowOff

The drainage holes work! Specifically one of the six really works…

How to make a tire flower planter @DIYShowOff

When we’re entertaining, I move the wall mounted tire flower planter to the interior wall of our covered patio. It’s simply hanging on a big humungous sturdy nail. When the party ends, the tire planter is moved to an exterior wall for sunshine and rain/watering. It’s awkward but not too heavy or difficult for moving around to maintain.

How to make a tire flower planter @DIYShowOff

I loved it so much, I needed one to hang in our magnolia tree:

How to make a tire flower planter @DIYShowOff

Doesn’t it look beautiful hanging with my DIY chandelier flower planter in the background? 

How to make a tire flower planter @DIYShowOff

To hang from a tree: Use chain (double hanging length, add about 10″ for in the tire and more for the size of your tree limb). Wrap chain around tree branch and secure end pieces inside of the tire with an “s” hook. 

How to make a tire flower planter @DIYShowOff

Pretty!

How to make a tire flower planter @DIYShowOff

*After I stood back and admired my completed project, I decided to see if it had been done before and of course! You can see this idea at Recaptured Charm too. Sharing at So You Think You’re Crafty.

More planter ideas:

chandelier-planter-feature

House Number Flower Pots

house number flower pots

See more fun DIY ideas at Lowe’s Creative Ideas, follow Lowe’s on InstagramPinterest and sign up for the Creative Ideas magazine and app!

Spring 13 Blogger Badge Subscribe Banner Version

*Disclaimer: As a member of the Lowe’s Creative Ideas Creators and Influencers network, I received a Lowe’s gift card to complete this project. The tutorial images, instructions and opinions are my own. DIY results may vary.

One Room…Many Ways

This little room right off of the dining room really doesn’t have a function and gets a makeover more often than any other room in our home. As in…made over on a nearly monthly basis…since I like to re-arrange and move things around so often. Here’s a look at this room’s decorating history…

It started off looking like this when we bough our home:

sitting room before

We installed French doors, slate tile and a rescued a giant mirror…

entryway

Sometimes it displays my latest thrifty treasures…

sitting room

thrifty sitting room

Or acts as an extension to our dining space…

dining nook

Or a rarely used sitting room…

sitting-room

sitting-room 

At Christmas time, it’s my favorite space to decorate…

christmas sitting room

And currently it’s a little work space…

DIY script drop cloth drapes

DIY no sew drop cloth {script} curtains.

office space

with a cute DIY globe light fixture cover

globe light cover

Here’s what the other side of the room currently looks like: {wall mounted pallet shelf}

eclectic hallway

It’s like playing with a life sized doll house. Do you switch it up routinely? 

I’m joining in the party:

restyled space link party

(thin) DIY wall art

We have a sliding door in our dining room…

eclectic dining room

It slides to the right to open. Which means, I can’t hang most things like framed art or a clock or mirror in that space if I want to slide the door open. Shown above…I can’t push that door any further than the mirror, otherwise, the door will knock it right off of the wall.

Earlier this week I shared a DIY foamboard project that I used as a fun gallery wall template/background…

foamboard wall art tutorial

Which made me think…foam board is lightweight AND thin and would work great in our dining room. Perfect wall art material fitting behind a sliding door.

This is how I also know that painting foam board isn’t such a great idea. It warps and bows but I’m still loving my project.

Using FrogTape, I taped off alternating stripes, making sure to press down the edges securely to activate the PaintBlock Technology (to keep the paint from seeping under the tape). 

FrogTape Wall Art

Then painted my stripes. (I think using a Sharpie or decorative tape would be a better option.)

DIY foam board art

I then removed my FrogTape. It did remove the paper backing in places which is what gives my finished project an aged, distressed look. Even though it didn’t go according to plan, I didn’t give up. 

Using my Silhouette Cameo, I created vinyl decals (flatware silhouettes and the letters “D I N E”). Vinyl and transfer paper provided by Happy Crafters

applying vinyl decals

Then I used a glaze to ‘stain’ the bright white stripes and the areas where the paper pulled off with the FrogTape. 

diy foam board art

So where the paper pulled away gives it a distressed look:

distressed dine sign

My foamboard is bowed so I did try adding weight for a while with books. Fail. It didn’t help. But I hung it up anyway using command strips. Even with the warping, it’s still a great fit behind the sliding door…

easy DIY dining room art 

With the sliding door open…

dining room sliding door wall art

Not bad, right? Lesson learned: don’t paint foam board but I do love that it’s lightweight and thin so I’ll definitely be creating another DIY foam board project for this space. Perfect behind my sliding door. 

*This post is brought to you by FrogTape. FrogTape provided by Shurtech. The opinions are completely my own based on my own experience. For more FrogTape projects ideas, check out the FrogTape Blog Squad.

 FrogTape Blog Squad

*This is a sponsored post. Vinyl and transfer paper provided by Happy Crafters.

HClogopngsmall