Was it the most tedious process ever? Yes. Do I love it and find it totally worth it? Definitely.
When I won a stencil from Cutting Edge Stencils thanks to DIY Showoff’s giveaway, I knew right away houndstooth was the only way for me to go. I was nervous that the stencil would be a single houndstooth, so I was thrilled to discover how large the stencil was when I got it in the mail.
My biggest issue with the stencil was there was no way to keep the middle part flat against the wall. The instructions said to paint with a sponge roller –but not only would that get messy but I would not get the crisp lines I was wanting.
So I decided to use the stencil to trace the pattern onto the wall and then tape everything off. Yep, the project I envisioned to take me a day took me 4 weeks.
Some readers wanted to know how I fly through so many audio books last month – paint a houndstooth wall and you’ll figure it out too. ☺
Honestly though, it wasn’t as bad as it sounds, once I figured out a system. I got the majority of the project done over 3 Sundays, so I don’t feel as thou
Considering the stencil was free, I only spent $18 and that was on painter’s tape. I used leftover paint from my office stripes.
I’m blogging and drinking wine. You have been warned.
I wanted to spare the length of the previous post, and do all the talky talky in this post.
I never hated my fireplace, but I never liked it. It was this thought right there that made me take the plunge.
Before:
PREP
My fireplace was dirty. There was grout that would just fall off if you looked at it the wrong way. Brick is tricky like that, because it takes more work than running a vacuum over it (although, don’t worry, you have to do that too).
1. Use sandpaper. You aren’t using sandpaper to rough up the brick, you are using the sandpaper to get all the crap out. During this process, I recommend focusing mainly on the grout regions.
2. Vacuum. Now it’s time to vacuum, to get all the loose nasty out.
3. Wipe down. I used several damp paper towels over it, to further clean it.
PAINT
I decided to use the same white paint I have been using everywhere else in my house – Ralph Lauren’s Frost in semi-gloss. I wanted to stick with semi-gloss, because the brick would suck up a lot of the shine to it and it would be easier to clean.
The brick on my fireplace is very textured and rough, because of this I didn’t use a primer. But if your brick is of a smoother quality I would recommend one.
Once I was done painting, I moved on to caulking bricks that were cracked.
THE SCREEN
Addressing the screen was the scariest part of this project for me. I decided to take my friend Leslie’s advice and spray paint everything indoors, like she did on hers.
When picking a spray paint – make sure you are using one that is heat resistant. Sure, it doesn’t come in as many fancy colors, but it also doesn’t set your house on fire. (Food for thought).
Here’s my screen all taped off and ready to go:
Unfortunately, I’m a moron and got the spray paint on my feet and neglected to realize it. And of course I walked around the family room, leaving a nice film of spray paint dust everywhere. So, if you are wanting to spray paint indoors – stay on your plastic tarp.
THE SHELVES
While it’s might be hard to tell in this photo, the shelves looked terrible once the fireplace went white. Like everywhere else in the house, the previous homeowners were a fan of beige with a yellow tint. When you pair this with white, the beige transforms into a pastel yellow.
Once the shelves went white, I painted the background a different color for a pop.
After:
This post is brought to you by Victorian Fireplaces, beautiful and stylish cast iron, marble and wood fireplaces.
Love the houndstooth and the updated fireplace makes SUCH a huge difference!
~ Liz
http://www.itsgreattobehome.net
Thanks for the Niski update my DH and I are thinking of her often. -N
That fireplace turned out awesome!!
And glad to hear Niski is hanging in there … and I so hope you snapped a photo of her in the diaper — too cute! 🙂
glad you're baby is doing better! 🙂
beautiful makeovers…
and good to hear she's better 🙂
A spray stencil adhesive can help hold your stencil in place. For roller stenciling, use a dense foam roller and offload, offload, offload! Too much paint is the cause of run unders, and stenciling is typically a dry brush (or dry roller) technique.
Love the wall stencil and the white fireplace! I've always loved what a can of paint can do you a fireplace!!
Also love that Niski is doing a bit better!! Hoping she just keeps getting better!!!
Glad to hear Niksi is doing better! Poor girl!
And on to the houndstooth…OMG! I cannot believe she taped all that and painted it. I don't know anyone who has enough patience for that!
The fireplace also looks great. The white looks so fresh with a punch of bright color in the accessories. Great job!
Wow that fireplace looks just gorgeous. You have way more patience than I do with stencils, it turned out wonderful.
Have a great day.
I'm so glad your little sweetheart is doing better. Kisses, Niski!
Jude