When we got it home from Lowe’s, my sweet husband suggested doing a herringbone pattern (because the herringbone patterned brick walkway and patio wasn’t enough torture, I guess) and I think he realized after his offer, that he may have stuck his foot in his mouth. But he did a beautiful job despite the tricky cuts, despite the fact that most of it is covered by a washer and dryer, a throw rug and someday soon, cabinetry and shelving.
This isn’t a full detailed tutorial per se because I’m not the one who did the work but I did take some pictures of the process for your DIY tiling enjoyment. Be sure to do plenty of research on tiling tips before beginning. Ready?
Level subfloor. Check. Hubby glued and screwed down Hardibacker.
He started the tile pattern by creating a border around the space and cutting/laying out/fitting those tiles first.
Then laid out the placement of the herringbone with solid un-cut tiles in the design.
Next up is cutting the tiles needed to create a herringbone pattern in the space between the tile border.
We find (he finds) that using FrogTape on the tile cut lines for tricky cuts with angles or small pieces helps prevent breakage.
We used 1/32″ spacers. We didn’t want huge gaps between the tiles since they resemble wood.
Next up, he set the tiles with mortar (OmniGrip) applied with a trowel.
Then removed the spacers and started the grouting process. We let it ‘cure’ for a week before applying the grout.
Grouting: We chose a black grout because it gave a similar look to the edges of our distressed antique java bamboo floors in the adjoining room. He used a sanded black epoxy grout (Quartz Lock Urethane Grout – jet black), smushing it into the spaces between the tile with a float then wiping away the excess with a sponge.
Let dry a good 24 hours before walking on it and because we were awaiting appliances, it was a couple weeks before every-day traffic.
Isn’t it beautiful? I was half tempted to put the washer and dryer somewhere else so I don’t have to cover it up! More laundry room makeover details coming up. Stay tuned!