DIY Project Parade and patching holes

Mr. DIY installed recess lighting in our kitchen and one of the holes was put in the wrong spot.  No biggy.  Patching drywall is easier than it sounds. Please ignore the fingerprints. I always joke with Mr. DIY that he would not make it in a life of crime…he leave his prints everywhere!  Our ceiling is plaster and lathe.  We patch using drywall.

How to patch a hole:
1.  Insert a scrap piece of wood into the hole (for new drywall to attach to). If you’re patching a hole in the wall, you’ll need to add support or cut around the hole to a stud so that there is a way to support and attach a new piece.

2.  Screw the wood block into place.
3.  To get an idea of the shape/size of the hole, use a piece of paper to do a rough trace and cut small matching piece out of drywall (we have a lot of scraps).
4.  Secure the drywall into open hole using screws into the wood.
5.  Thanks to our friends at True Value, we used a drywall patch kit which consists of aluminum sticky mesh tape to help the drywall mud adhere.  
6.  Smooth on drywall mud (joint compound) in two even layers, allowing time to dry in between skim coats.
7.  Once dry, sand smooth.
8.  Apply a coat of primer and clean fingerprints if necessary. 
9.  Paint.
Can you tell where the mistaken hole was?  We can’t!
~*~*~*~

If your project is holiday related, please feel free to link up to the DIY Holiday Highlights party as well!
The DIY Show Off
If you’d like to link YOUR DIY project post to The DIY Show Off Project Parade:
1.You must use the button above and link to this post to share the linky love.
2.Include your name or blog name and project title. Add your permalink (not your blog url, but your DIY project post url). Feel free to link a Past Post, just invite your readers in a current post with a quick note.
3.Or email your link to thediyshowoff@gmail.com and I will add it for you.
4.If you notice your link has disappeared -please add the link back to The DIY Show Off to your post today, a button or a quick note to your readers about the party and try again! I love when everyone participates and readers check out everyone’s links, but I think the return favor of linking back is the nice thing to do so everyone plays fair and enjoys all of the projects and links. Also – this blog party is for DIY projects only. Links not related to DIY will be deleted.

*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~
I was one of the bloggers selected by True Value to work on the DIY Squad. I have been compensated for my time commitment to the program as well as my writing about my experience. I have also been compensated for the materials needed for my DIY project. However, my opinions are entirely my own and I have not been paid to publish positive comments.
~*~*~*~*~

Once again…thank you for sharing our sorrow and comforting words for us during our loss of our doxie, Niski.  It means SO much to us!

12 thoughts on “DIY Project Parade and patching holes

click to read what friends are saying...


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.