DIY upholstered tufted ottoman tutorial {Wayfair DIY Challenge}

Remember, oh I don’t know, 10 years ago (Just kidding. It feels that way!) when I started our family room makeover? Then we got sidetracked with an apartment renovation but since we’re wrapping up the last minute details there, the family room makeover is back on my DIY schedule. Of course that means a lot of DIY projects, decorating and furnishing and on that list was a DIY upholstered tufted ottoman. 

DIY upholstered tufted ottoman

Challenge: Have you heard of Wayfair.com? It’s the largest online retailer of home furnishings and decor, with millions of products for the home that fit any style and budget. They believe that getting crafty with your decor is one of the best ways to add a unique personal touch to your home. That’s why they created the DIY Blogger Challenge. I was invited to participate and had the option to choose from a coffee table, book case or pendant light. All fun products but I took one look at the coffee table and knew I wanted to create an upholstered tufted ottoman.

pinterest challenge logo

And as I found many tutorials and inspiration on Pinterest, I’m joining the Fall Pinterest Challenge as well. I have built an ottoman in the past {see my tips for building an ottoman} but tufting is a new experience to me and one I’ve been wanting to try for a while now. My ottoman upholstery/tufting experience: 

DIY upholstered tufted ottoman tutorial

Here’s what I did: 

  • Furinno Espresso Coffee Table
  • 4″ foam (This can be pricey. Use coupons or try foam from an egg crate twin bed cushion.) 
  • batting
  • fabric (I purchased 1 1/2 yards. 1 yard for the project, scrap for button covers)
  • spray adhesive
  • tools: scissors, Sharpie, yard stick, drill, electric knife, felt tip pen, screwdriver

I started by laying the coffee table top on my foam and measuring just a little bit bigger (about 1/2 inch).

DIY tufted ottoman - marking foam

Using an electric knife, I cut out my piece of foam.

DIY Ottoman Tutorial - cutting foam

With a yard stick and measuring in halves, I made a grid on the foam with a Sharpie. Then decided where I wanted my button tufts to be located. I did 3 rows totaling 11 buttons (4 buttons, 3 buttons then 4 buttons). 

DIY ottoman tutorial - grid on foam

I poked a hole where I wanted my button tufts using a screw driver. Then flipped my foam and poked through that side as well.

DIY ottoman tutorial - poking holes in foam

The screwdriver pushed out the foam, creating a small hole all the way through the foam. 

DIY ottoman tutorial - poking holes in foam

I flipped my coffee table top back side up, laid the foam on top and using a felt tip pen pushed into the holes, I made a mark on the table top where I’d want to drill holes for tufting. 

DIY ottoman tutorial - marking drill holes

I drilled the marks, then flipped the table top over and cleaned up that side of the drilled holes by drilling through them again. 

DIY ottoman tutorial - drill holes

Next I used a spray adhesive to attach the foam to the table top. 

DIY ottoman tutorial - spray adhesive for foam to wood

Then covered the foam with batting (cut just a half inch longer than the edges of the foam and table top).

DIY ottoman tutorial - cover foam with batting

I covered the batting with my fabric. Again, measuring and cutting just enough to pull onto the underneath for stapling. 

DIY ottoman tutorial - cover with fabric

Tufting:

  • fabric scrap and button kit (or buttons for tufting)
  • upholstery needles
  • wax covered button thread DIY ottoman - tufting materials
  • anchor buttons
  • staples
  • tools: stapler, scissors

I put together the fabric covered buttons I wanted to use on the top of my ottoman for tufting. 

DIY ottoman tutorial - fabric covered buttons

Then, I threaded the largest upholstery needle with the waxed button thread. (I had no idea what this was for when starting but learned through use that the wax helps hold the tufted button when the waxed thread is pulled tight.) I attached the fabric covered button to my threaded needle and started at the center of my upholstered table top. Locating the hole is tricky (I did lift my batting to help guide my needle). Find the tufting hole and poke the needle through the fabric, batting, foam hole and into the hole in the wooden table top, pulling the needle out the bottom of the table top.

Thread an anchor button onto the needle. Thread the needle back through a second hole in the anchor button and back up through another hole one more time.  Push the button down towards the hole in the wooden table top. Pull tight.

While thread is pulled tight and anchor button is secure against the wooden table top, staple thread onto the wooden table top a few times using a zig zag pattern.

Leaving enough thread to tie a knot, cut the thread and put the needle aside. Tie a knot in the thread.

DIY ottoman tutorial - tufting tutorial

Repeat. I worked from the middle out. Note: I used random anchor buttons I already had on hand.

The front will look like this:

DIY ottoman tutorial - button tufting

Move completed tufted table top to an area where it can lie flat. Pull the fabric tight around the sides of the foam to the under side of the tabletop and staple into place. Start in the middle of each side and smooth batting and fabric as you go. 

DIY ottoman tutorial - stapling fabric

Then work on the corners. Wrap them like a present. There is no wrong way, just try to create a smooth corner. Staple into place on the bottom of the table top. Be sure to stay clear of the pre-drilled holes for attaching the legs to the table top!

All done! For added security, I covered my buttons and thread with duct tape (not shown). Flip and admire your upholstered tufted ottoman cushion!

DIY ottoman tutorial - upholstered tufted bench

Assemble the rest of the coffee table as per instructions. Attach newly upholstered tufted top just as you would the regular top according to the directions. Assembly was extremely easy.

DIY ottoman - assemble coffee table

  • tools: screwdriver, rubber mallet 

Accessorize: What I loved about this coffee table is that it has two bottom shelves and comes with bins! I gave the bins a little makeover using FrogTape and fabric paint and added chalkboard labels that I had on hand. 

DIY ottoman - painting bins

Now I have an upholstered tufted ottoman for the family room!

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

DIY upholstered tufted ottoman

What do you think? Pretty easy and affordable. Visit wayfair on facebook here or on pinterest here.

Facebook

DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

Disclosure: Thank you to Wayfair for the coffee table and the challenge and to Giftcards.com for providing the gift card for my project materials. This post was also partially sponsored and brought to you by FrogTape. The opinions are completely my own based on my experience and project results may vary. 

 FrogTape Blog Squad

Linking up:

TDC Before and AfterHome Stories A2Z
and more about the Fall Pinterest Challenge from these sweet friends hosting:
Katie from Bower Power Blog
Sherry from Young House Love
Sarah from Ugly Duckling House
Carmel from Our Fifth House

How to turn a coffee table into an ottoman ~ Inside Out Design

Brooke from Inside Out Design is sharing how to turn an old coffee table into a tufted ottoman. It takes a little work, but transforming an old coffee table with some foam and fabric can make add a beautiful element to your existing living room space. I do have an old coffee table hanging out in the basement and Brooke’s tutorial is an inspiration!

Brooke’s coffee table is actually pretty cute with a painted stencil design but she felt the height was wrong for her couch, wanted to add a beautiful designer fabric to her living room (sometimes throw pillows aren’t the answer) and having a comfy place to prop feet is always a bonus. I know I’m always propping my feet up onto a glass coffee table and it’s not ever comfortable. ::envisions of basement coffee table with a new look and coffee foot prop::

painted stenciled coffee table

Quick summary:

To adjust the height, Brooke and her husband cut (and painted/distressed) the existing lets and reattached them.

distressed coffee table legs

Next, they added a frame so that it’d look more like an ottoman and less like a coffee table. The new wooden frame will support the new upholstery and hides the drawer.

ottoman frame

A little math for spacing and a chalkline create a grid for drilling tufting holes…

ottoman tufting holes

They ordered pre-cut foam (awesome! see original post for details) and attached to the wooden frame using spray adhesive.
Add batting by stapling to the wood frame…
then fabric…
What a transformation! It looks good just like this…
But of course, tufting makes everything better. Brooke made up some buttons with the fabric and created some tufts (link to tutorial below). The final result is stunning and a beautiful addition to her living room!
tufted upholstered ottoman Isn’t it gorgeous? Repurposing the old coffee table was a genius idea! And what a beautiful home surrounding it!

You can get the full details at Inside Out Design:

Part 1 – Turning a coffee table into an upholstered ottoman

Part 2 – Upholstered ottoman tufting tips

Another coffee table turned upholstered ottoman tutorial HERE. DIY upholstered tufted ottoman tutorial

 

and more DIY coffee table ideas.

Tiffany & Co. spray painted steamer trunk

Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

Easy Ottoman Makeover

Wow! Martha from

Leone Design

makes her ottoman makeover so easy, I want to tear mine apart right now and give it a makeover! Take a look at this for inspiration:

Thrift store ottoman – before shot:

1. First, remove upholstery nails and save for use on the finished piece.
2. She covered the top and sides with the same fabric (so that it would show through the burlap).
3. Next she covered the sides with strips of coffee sacks.

4. She painted the legs to bring the light cream.
5. Martha used tacky glue and duct tape (to hold in place) to tack down the sides/seams.

After an hour or so of drying, She simply removed the duct tape.

Isn’t this so fun? I love the mix of striped fabric with grain sack burlap! Great job, Martha!



What do you think? Love it, right?!

To pin from the original source and see more amazing DIY from Martha (so many furniture makeovers with lots of helpful tips) at

leonedesign.wordpress.com.