Snack Time Table Runner

Serving up snacks for guests? Dress up the ‘buffet’ with a cute table runner. 

snack time table runner tutorial @diyshowoff

Materials I used: 

What I did: 

Wash, dry, iron and hem edges of toweling fabric to create a runner. I accidentally deleted the photos from this step…but the toweling only needs hems on the short sides. 

Create text using Silhouette Studio Designer software. 

snack time table runner tutorial @diyshowoff

Important: flip/mirror text (right click and “flip horizontally”). 

snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff

Adjust Silhouette blade settings for heat transfer in the “cut” screen.

Load iron on vinyl into machine shiny/pattered/glittered side down and click “cut”.

snack time table runner tutorial @diyshowoff

When complete, remove vinyl from machine and weed away excess iron on vinyl. Design/text will show backwards on the tacky side of a transparency. 

snack time table runner tutorial @diyshowoff

Place iron on decal with transparency onto fabric. Cover with scrap fabric and apply heat with iron on high setting for 20-30 seconds.  snack time table runner tutorial @diyshowoff

 

snack time table runner tutorial @diyshowoff

Pull away transparency. (If iron-on pulls up, replace transparency and repeat applying heat.)

snack time table runner tutorial @diyshowoff

After iron on decals are all placed, iron entire runner on the back side.

Perfect for adding a special touch to snacks for a small gathering. 

snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff

Cute display for appetizers, desserts and beverages displayed on our kitchen island.   snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff snack time table runner tutorial @diyshowoff

 

snack time table runner tutorial @diyshowoff

*This post is sponsored by Happy Crafters and my last one. What a fun partnership – I’m in love with the products and they’re affordable too! Tutorial, experience and opinion are my own. Check out all the supplies at Happy Crafters for great prices, products and inspiration for your next project. 

HClogopngsmall

Jazz up baby’s crib for under $10

Need a splash of color in the nursery? Jazz up the crib with vinyl decals for less than $10! 

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

Crib before:

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

Materials I used: Happy Crafters adhesive vinyl x 2 colors 

Tools Needed: Scissors

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

The Oracle brand adhesive vinyl from Happy Crafters has a grid on the back side. Using scissors, simply cut strips of adhesive vinyl to size. No vinyl cutting machine required.  

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

Remove backing and place onto crib like stickers. You choose the color or colors that coordinate with your space. Best part? They’re removable! Get a fresh new look temporarily without ruining the crib’s finish. 

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

After: 

Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff Jazz up your crib for under $10 with DIY adhesive vinyl decals. Tutorial @diyshowoff

Can’t go wrong with easy, affordable, temporary and cute crib decorating! 

*Please note that you should make safety your first priority. If you find that your vinyl decals are peeling up, remove vinyl immediately. We do not have any issues, I’m only sharing a decorating project that works for us. Attempt this project at your own risk. 

**This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. I love the products and the prices are affordable. Check out all the supplies at Happy Crafters for great prices, products and inspiration for your next project. 

HClogopngsmall

DIY Vinyl Iron on Decal

My monthly project for Happy Crafters is all about iron on vinyl, my favorite being the gold vinyl where I can quickly add a little bling to a plain t-shirt, tote back, pillow covers, onesies, etc. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Materials:

Tutorial:

Use Silhouette Design Studio software to create a design of text with a quote. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Resize text the text box and font to fit the front of your t-shirt. 

*Important! Right click and “flip horizontally” so that the text is a mirror image/backwards.

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Load sheet of vinyl iron on into the machine shiny/color side facing down. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Click “send to cut” and be sure to adjust settings for cutting smooth heat transfer. I found that I needed to up the blade 2 more than recommended to get through the vinyl (awesome quality stuff!) so you may want to do a small text cut. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Click “cut”. Once cutting is complete, remove vinyl from machine. 

Trim away excess vinyl. I like to have about an inch border around my text.

Weed away the negative part of the design (leaving text on the tacky clear transfer sheet). 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Place iron on sticky side down onto t-shirt.

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Iron according to paper instructions included with the vinyl iron on material with a cotton cloth over the transparent plastic. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

Carefully peel away clear transfer sheet. If vinyl iron on design hasn’t transferred, replace transparent sheet and re-iron/try again. 

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

That’s it! This metallic gold foil has a mirror quality, reflections in the decal. So cool!

gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters gold metallic iron on vinyl decal tutorial @diyshowoff #happycrafters

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. I love the products and the prices are affordable. Check out all the supplies at Happy Crafters for great prices, products and inspiration for your next project. 

HClogopngsmall

Easy DIY Personalized Easter Basket Liner

Happy Spring! With a new grand-baby in the family, I can’t help but get all giddy about making up an Easter basket this year. As you know, I love to personalize gifts and with just a t-shirt and a DIY iron-on vinyl, this liner is super easy to make! 

DIY personalized Easter basket liner tutorial @diyshowoff

What I used:

personalized Easter basket liner @diyshowoff

What you’ll need: sewing machine, scissors, straight edge, computer/vinyl cutter, iron. 

What I did:

Lay inside out t-shirt flat and using a straight edge, draw a line beneath the t-shirt arms. This is the sewing guide…simply a straight line. 

personalized Easter basket liner @diyshowoff

Sew along the line. 

personalized Easter basket liner @diyshowoff

Then cut straight across above the sewn line (right below the armpits of the t-shirt). 

personalized Easter basket liner @diyshowoff

Flip right side out. 

Place the seam inside of the basket and fold the edges of the t-shirt over the basket to create a liner. Measure how much room you have horizontally and vertically to get an idea of your iron on design’s size. I kept mine under 2″ high by 7″ wide. 

personalized Easter basket liner @diyshowoff

Using the Silhouette Design Studio software, I created a graphic with name and a cute little bunny shape. 

personalized Easter basket liner @diyshowoff

You’ll need to mirror the text and image by right clicking and selecting “flip horizontally”. 

personalized Easter basket liner @diyshowoff personalized Easter basket liner @diyshowoff

Double check the size. (One sheet of iron-on vinyl is going to make a LOT of decals!) 

personalized Easter basket liner @diyshowoff

Load vinyl into the machine shiny side down. The shiny side is actually the transparent cover. Vinyl is the matte side (facing up). 

personalized Easter basket liner @diyshowoff

Send the design to ‘cut’. Adjust setting for heat transfer material and “cut”.

personalized Easter basket liner @diyshowoff

When cutting is complete, remove vinyl from machine. Trim to a manageable size. 

personalized Easter basket liner @diyshowoff

Weed away the excess vinyl. The decal will show a backwards design on the transparency. 

personalized Easter basket liner @diyshowoff

Smooth out the t-shirt liner with the open end facing you. Place the iron on decal towards the bottom, centered. 

personalized Easter basket liner @diyshowoff personalized Easter basket liner @diyshowoff

Cover with a cotton cloth (or the scrap t-shirt material) and iron according to instructions that came with the iron on vinyl.

personalized Easter basket liner @diyshowoff personalized Easter basket liner @diyshowoff

Carefully remove the transparency film. 

personalized Easter basket liner @diyshowoff

Line the Easter basket and fill. Easy, right? Cute too! 

DIY personalized Easter basket liner tutorial @diyshowoff DIY personalized Easter basket liner tutorial @diyshowoff

It’s actually a pretty easy DIY project for any time of the year, any basket or to personalize a gift basket for any occasion.

DIY personalized Easter basket liner tutorial @diyshowoff

 

More Easter DIY ideas

DIY warm cool aromatherapy snuggle bunnies @diyshowoff #essentialoils dip-dyed-easter-egg-tutorial DIYShowOff Easer succulent garden

 

 

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. I love the products and the prices are affordable. Check out all the supplies at Happy Crafters for great prices, products and inspiration for your next project. 

HClogopngsmall

Valentine Mason Jars

Valentine mason jars @diyshowoff

Being able to create your own vinyl decals makes last minute quick gifts easy. You’ll need:

Valentine's Day mason jars Happy Crafters

Of course you can create your own designs by just cutting things out with scissors but investing in a vinyl cutter has proven to be well worth the it. I simply created some Valentine designs and circles for mason jar lids using the Silhouette Design Studio software…

Valentine mason jars @diyshowoff

Load vinyl into the machine pattern/shiny side up. 

Valentine mason jars @diyshowoff

Adjust settings for vinyl and send design to cut.

Valentine mason jars @diyshowoff

Remove vinyl from machine and weed away (remove) excess vinyl (vinyl that isn’t a part of the decals).

Valentine mason jars @diyshowoff

Apply vinyl like stickers or use transfer paper to decorate mason jars and lids. 

Valentine mason jars @diyshowoff

Add ribbon or decorative tape to embellish and fill jars with candy, small gifts, homemade bath salts, etc. Instant, quick easy Valentine gifts for teachers or friends. 

Valentine mason jars @diyshowoff Valentine mason jars @diyshowoff Valentine mason jars @diyshowoff Valentine mason jars @diyshowoff

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for great prices, products and inspiration for your next project. 

HClogopngsmall

Personalized Baby Gift Set

I love being creative when it comes to baby gifts and personalizing a baby layette set with iron-on vinyl decals is just so easy to do!

DIY personalized baby layette gift set @diyshowoff

Supplies:

What I did:

Using my Silhouette studio designer edition software, I created a few fun decals. 

DIY personalized baby layette gift set @diyshowoff

For iron-ons, text (and some images) will need to be mirrored/flipped horizontally. Simply right click and choose “flip horizontally”. 

DIY personalized baby layette gift set @diyshowoff

Load the vinyl into the machine shiny side down (the shiny side is the transparency side). 

DIY personalized baby layette gift set @diyshowoff

Adjust settings for cutting heat transfer material and send to cut. Unload vinyl from the machine. (Note: I do not use a cutting mat as shown below.)

DIY personalized baby layette gift set @diyshowoff

Cut off the excess vinyl/material and weed (remove) the unwanted part of the the vinyl leaving just the decals. 

DIY personalized baby layette gift set @diyshowoff DIY personalized baby layette gift set @diyshowoff

Set iron according to heat instructions provided with vinyl iron on. 

Place iron on decal, shiny side facing you (iron on isn’t sticky but the clear transparency is…sticker side down to help hold iron on in place). 

DIY personalized baby layette gift set @diyshowoff

Cover with a cotton diaper cloth, burp cloth or towel and heat iron on according to instructions. 

DIY personalized baby layette gift set @diyshowoff

Carefully peel away transparency (if iron on pulls up too, re-place and iron some more). 

DIY personalized baby layette gift set @diyshowoff

Create an entire personalized baby layette gift set…

DIY personalized baby layette gift set @diyshowoff DIY personalized baby layette gift set @diyshowoff

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

JOY vinyl covered wood blocks tutorial

JOY vinyl covered wood blocks

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

What you’ll need: a vinyl cutter (or cut vinyl out by hand using scissors)

Happy Face Pattern Adhesive Vinyl - Holiday 8 Pack

Tutorial:

Using the Silhouette Studio Designer software, create individual designs…I created one for wrapping each block (measure and add up all side of each block for width and the height of block), three individual rectangles for the top of each block. Then the letters J – O – Y (be sure to create a size that will fit nicely on the front of each block). 

JOY vinyl design

For wrapping each block, I used the striped vinyl and the patterned vinyl for lettering. 

For each design, load vinyl into the machine pattern side facing up. 

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

Send design to cut. Adjust settings for cutting vinyl. Cut. 

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

Unload vinyl.

Peel away vinyl (like stickers) and apply vinyl to blocks, wrapping first

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters   JOY vinyl covered blocks tutorial @diyshowoff #happycrafters JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

 

then the top rectangle…

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

followed by a letter for each block. 

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

So cute. A great gift or holiday decor.

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

 

Decorate!

JOY vinyl covered blocks tutorial @diyshowoff #happycrafters

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Metallic Gold Arrow Accent Wall Tutorial

A small plain wall is a great spot for adding some pattern and detail to a room. This small wall in the apartment nursery nook was just begging for a little attention. Here’s what we did to give it some pizzazz:

metallic gold arrow wall at diyshowoff.com

Arrow Accent Wall Tutorial

Materials:

What worked for me:

I started with creating triangle (arrowhead) vinyl stickers in my Silhouette Design Studio software. (Since I had some extra space, I created a few vinyl decals including the letter A and a deer head as well…they aren’t a part of this project.)

metallic arrow wall design tutorial @diyshowoff

I hit the “cut” button and adjusted the settings on my blade for vinyl. 

metallic arrow wall design tutorial @diyshowoff

Load the vinyl into my Silhouette Cameo color side facing up. 

metallic arrow wall design tutorial @diyshowoff

Hit “cut” and remove from machine. 

metallic arrow wall design tutorial @diyshowoff

Weed away the excess vinyl (the vinyl that’s not a part of the design). Vinyl stickers. That fast!

metallic arrow wall design tutorial @diyshowoff

On the wall using a level and Sharpie, I drew vertical lines evenly spaced part. 

metallic arrow wall design tutorial @diyshowoff

We then decided on placement of the arrow heads, alternating the direction every other line. 

metallic arrow wall design tutorial @diyshowoff

I cut a “chevron” pattern from cardboard and used it to create arrow tails, again, evenly spaced and alternating the direction every other line. 

metallic arrow wall design tutorial @diyshowoff metallic arrow wall design tutorial @diyshowoff

Ali used a piece of damp magic eraser to erase the Sharpie line between arrows (note for potential future reference: magic eraser works on removing permanent marker from walls). 

metallic arrow wall design tutorial @diyshowoff

That’s it. I was hoping for a more staggered look, but even with drawing it out on paper, the final design had an alternating horizontal pattern too. Cool! 

metallic gold arrow wall - nursery @diyshowoff

What do you think? Cute. Simple. Right? 

See the entire nursery nook HERE

small apartment nursery nook reveal @diyshowoff

See my guest room/nursery space for more nursery ideas:

combined guest room nursery reveal @diyshowoff DIY nursery wall decor at diyshowoff.com easy diagonal wall paint design tutorial @diyshowoff painted craft box DIY at diyshowoff DIYShowOff Michaels Makers back to school book ends feature

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Vinyl Decal Tutorial for Stainless Steel Tumbler {for essential oils}

Once I started experiencing the benefits of using Young Living essential oils, I’ve been adding grapefruit, tangerine and sometimes lemon essential oils to my water. Love it! It’s definitely increased my daily water intake! However, because Young Living citrus essential oils are so potent, using a glass or stainless steel drinking vessel is recommended. 

I found this awesome stainless steel tumbler (including lid and straw) on Amazon. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

It works beautifully – keeps drinks SUPER cold with a double insulated wall. Design wise, it’s a little boring and plain so of course I couldn’t help but create some vinyl decals to dress it up a bit. 

Materials:

What I did:

I added my designs (shapes I already had on hand) to the Silhouette Designer Software template, making sure they were at a size that would fit my tumbler. Designs are previous purchases from the online Silhouette store accessible through the software. 

I sent the design to cut. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

I adjusted setting as needed for cutting vinyl (you may want to do a test cut). 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

I loaded my adhesive vinyl glossy color side up into the machine. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

I clicked “cut” and removed vinyl from machine when cutting was complete.

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

Then, I peeled (weeded away) the vinyl that surrounded the design. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

Next I added a piece of transfer paper to the decals and rubbed with a credit card to ‘transfer’ the design. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

I peeled away the transfer paper, separating it from the wax papered backing (vinyl decal should now be on the sticky side of the transfer paper). 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

I placed the decal sticky side down onto the tumbler’s surface then rubbed a credit card. 

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

When I peeled away the transfer paper, the decal transferred to the stainless steel surface. All done!

vinyl decal tutorial for stainless steel tumbler (for essential oils) @diyshowoff #happycrafters

*Now stainless steel tumbler must be hand washed (do not run vinyl through dishwasher).   Young Living essential oils - stainless steel tumbler for citrus oil @diyshowoff

Much cuter! And since my mom, my daughter and I all use these tumblers, now I know which one is mine! It makes a great holiday gift idea for your essential oils team or oily friends and family.

Young Living essential oils - stainless steel tumbler for citrus oil @diyshowoff

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Mailbox DIY Vinyl Decals

This poor mailbox had seen better days…don’t you think? 

DIY mailbox vinyl decals tutorial at diyshowoff

Time for a new one…

DIY mailbox vinyl decals tutorial at diyshowoff

One of the perks of owning a vinyl cutter (I have a Silhouette Cameo) is the convenience of making my own vinyl labels/stickers/decals. 

Mailbox Upgrade

Open up the Silhouette Studio Designer Edition software. Click the text button on the left, choose font and type house numbers and a monogram design. Size to fit flat mailbox surface.

DIY mailbox vinyl decals tutorial at diyshowoff

Click the “cut” button on the navigation bar. Choose “vinyl” and adjust blade settings. Insert vinyl color side up into the machine and click “cut”. 

DIY mailbox vinyl decals tutorial at diyshowoff DIY mailbox vinyl decals tutorial at diyshowoff

Remove vinyl from machine and weed away excess vinyl. 

DIY mailbox vinyl decals tutorial at diyshowoff DIY mailbox vinyl decals tutorial at diyshowoff

Apply a piece of transfer paper and cut apart individual designs. I have three. Numbers for the front of the mailbox, a monogram design and numbers for the side. 

Rub with a credit/gift card to ‘transfer’ the vinyl decals from wax paper to transfer paper. 

DIY mailbox vinyl decals tutorial at diyshowoff

Peel away transfer paper (vinyl decals should be stuck to tacky transfer paper). 

DIY mailbox vinyl decals tutorial at diyshowoff

Place onto clean, dry, flat surface of mailbox. 

DIY mailbox vinyl decals tutorial at diyshowoff

Rub with credit/gift card to transfer design. 

DIY mailbox vinyl decals tutorial at diyshowoff

Peel away transfer paper. 

DIY mailbox vinyl decals tutorial at diyshowoff

Ta-da! Pretty new address decals for the new mailbox.

DIY mailbox vinyl decals tutorial at diyshowoff DIY mailbox vinyl decals tutorial at diyshowoff DIY mailbox vinyl decals tutorial at diyshowoff

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

DIY Metallic Iron On Decal Tutorial

DIY metallic iron on decal tutorial @diyshowoff

I know, I know. I just shared a t-shirt tutorial a few weeks ago that I created for my sister but making up your own personalized iron on decals is so fun! Recently my blog buddy Julia from Cuckoo 4 Design (love her!) shared on her FB page the coolest t-shirt. It read “#BLOGGER”, however it’s only available in Germany so thinking along the lines of DIY (as usual), I decided to make my own for my August Happy Crafters project. They have a great selection of metallic iron on vinyl that I couldn’t wait to use.

DIY metallic iron on decal tutorial @diyshowoff

Materials:

What I did:

Open up your Silhouette Studio Design Edition software and create the text “#BLOGGER” for the front of the shirt. I also added “@DIYSHOWOFF” for the back of mine. Center on a 12×12 space. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Right click the text box to bring up the edit menu and select “flip horizontally”. You’ll need to mirror the text for cutting. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Load the iron on vinyl into the machine gold side down (back side up). 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Adjust blade setting for heat transfer and send to cut. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Unload from the machine and weed away excess vinyl. The silver/gold side will peel away from a tacky transparent side (your text will be stuck backwards to the tacky side). 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Smooth out the shirt onto an ironing board. Place iron on vinyl decal tacky side down in the spot where you’d like it to show on the front of the shirt. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Cover the decal with a cotton dish towel (or scrap fabric). Iron on high adding pressure according to the instructions provided with the Happy Crafters iron on vinyl. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Slowly peel away the transparency. If you notice that the vinyl hasn’t adhered, replace transparency and iron again applying more pressure. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Once transparency is removed, I replaced my cotton dish towel and ironed the lettering flat. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Repeat the same steps for adhering the iron on vinyl decal to the back you may want to slide a piece of cardboard inside of the shirt first to prevent re-heating the front iron-on decal. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

That’s it. I may have ironed mine on too high a temp so I have a sort of distressed look to my decal … which I love! So you may want to do a practice run/test to get it just right if you’re not a fan of the distressed lettering. Good luck! 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

And…it coordinates with my black and gold polka dotted iPhone case. #stylish haha!

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

What hashtag would you choose for your shirt? 

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

 

 

Glitter Iron On Vinyl Decal Tutorial

Many of you have asked how my sister is doing and guess what? She’s finally completely “all done” with her treatments! Hurray! Confetti & champagne! My hero! And my hero’s superpower is “hope”…

DIY glitter iron-on decal tutorial at diyshowoff …and like most heroic milestones, it’s an occasion for a celebration, right?! Right! Well, that’ll be coming up in just a few weeks when we celebrate her birthday with a super-hero themed “Bobbi-fest” but in the meantime, I whipped up a cute breast cancer survivor shirt. 

What I used:

What I did:

1. Using my Silhouette design studio software, I created a design using text and a breast cancer ribbon, keeping the overall size in mind for a good fit on the shirt. 

pink glitter iron on - hope is my superpower breast cancer shirt

2. Right click each part of the design and choose “flip horizontally” to mirror the text and image. 

pink glitter iron on - hope is my superpower breast cancer shirt pink glitter iron on - hope is my superpower breast cancer shirt

3. Load the vinyl shiny-side (pink glitter side) facing down into the vinyl cutting machine. 

pink glitter iron on - hope is my superpower breast cancer shirt

4. Choose glitter/flocked iron on adhesive from the drop down menu in the cut settings. Adjust blade settings. (Always do a test cut first to ensure the blade doesn’t cut too deep or too shallow.)

pink glitter iron on - hope is my superpower breast cancer shirt

5. Hit “cut”.

pink glitter iron on - hope is my superpower breast cancer shirt

6. When cutting is complete, remove from machine and peel away excess vinyl. Weed away the vinyl surrounding the design. 

pink glitter iron on - hope is my superpower breast cancer shirt

7. Following the iron on’s printed instructions, I laid out the shirt on an ironing board and smoothed out the wrinkles. Place vinyl onto shirt.

pink glitter iron on - hope is my superpower breast cancer shirt

pink glitter iron on - hope is my superpower breast cancer shirt

8. Cover with a cotton dish towel or cotton fabric and iron, applying pressure 25-30 seconds and then moving to the next spot on the design and repeating. I used the highest setting on my iron (no steam).

pink glitter iron on - hope is my superpower breast cancer shirt

9. Slowly peel away the transparency. (If letters peel away too, repeating step 8, applying more pressure/holding a few seconds longer.)

pink glitter iron on - hope is my superpower breast cancer shirt

Ta-da!

Hope is my super power breast cancer iron on decal tutorial

Despite nausea and having tests done the same day, she agreed to model my handiwork. Isn’t she beautiful? {I love how despite not feeling 100%, she smiles. And how her hair is growing back with curls!}

breast cancer (hope is my superpower) - Bobbi at diyshowoff.com

Now that the treatment is behind her, she’s free to focus on recovering, building up strength and feeling better every single day. Thanks for your prayers! xoxo

Glitter is so difficult to photograph. It’s a more uniform and sparkly than shown above. 

hope is my super power

 

party pink bling glitter iron on vinyl

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Beverage Recipe Vinyl Decal

Summer time in our home = lots of entertaining and hauling out the fancy glass beverage server for homemade lemonade is a must. Labeling glass containers lets guests know exactly what they’re consuming.

Beverage Recipe Vinyl Decal Label Tutorial

DIY lemonade recipe vinyl decal on beverage glass

Materials:

  • Glass beverage server
  • Happy Crafters Glossy Adhesive Vinyl (mint)
  • Transfer paper

Tools Needed:

  • Vinyl cutter (I use a Silhouette Cameo)
  • Scissors

What I did:

Open up Silhouette Studio Designer software. Choosing the font tool, write up a label. Simply the name of the beverage or ice. I included my lemonade recipe too. 

lemonade vinyl label tutorial

Load the vinyl, color side up into the machine. Adjust blade settings for adhesive vinyl and “send to cut”.

lemonade vinyl label tutorial

Unload vinyl, trim design if needed and weed away vinyl that isn’t a part of the design. 

lemonade /beverage vinyl label tutorial at diyshowoff.com

Apply transfer paper to the vinyl. Rub with a credit card. 

lemonade /beverage vinyl label tutorial at diyshowoff.com

Peel away backing (vinyl will transfer, showing reverse on the transfer paper).

lemonade /beverage vinyl label tutorial at diyshowoff.com

Place sticky side of the vinyl/transfer paper design to the glass. 

lemonade /beverage vinyl label tutorial at diyshowoff.com

Rub with a credit card then peel away transfer paper. 

lemonade /beverage vinyl label tutorial at diyshowoff.com

Tip for curved surfaces: Stick the center of the decal first. Apply by working from the center point out. I found it easier to carefully tear the transfer paper on each end between text to avoid wrinkles. 

lemonade /beverage vinyl label tutorial at diyshowoff.com

Mix up your beverage recipe and serve!

DIY beverage containter vinyl label at diyshowoff.com DIY beverage containter vinyl label at diyshowoff.com

Party time!

DIY beverage containter vinyl label at diyshowoff.com DIY beverage containter vinyl label at diyshowoff.com DIY beverage containter vinyl label at diyshowoff.com These glass containers are washed by hand. And I’ll simply peel off the vinyl lettering when if I want but I think it’s going to stay throughout the season.  DIY beverage container vinyl label at diyshowoff.com These glass containers are washed by hand. And I'll simply peel off the vinyl lettering when if I want but I think it's going to stay throughout the season. DIY vinyl decal for lemonade recipe

Visit The Shabby Creek Cottage for another fun summer vinyl project!

summer-mantel at The Shabby Creek Cottage

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

 

 

Party Favor Jewelry Dish

Looking for an easy DIY party favor idea? These melamine appetizer plates with vinyl decals make a cute little gift!

jewelry junk tray tutorial @diyshowoff.com

What I used:

What I did:

Measure flat center area of plates. Mine allowed for a 3.5 inch square design. Open the Silhouette Studio Design software and create words using font/text in a size that fits. I created six different designs.

vinyl decal tutorial for plates @diyshowoff.com

Load adhesive vinyl into the vinyl cutter color side (vinyl side) up. 

vinyl decal tutorial for plates @diyshowoff.com

 

Adjust blade setting for vinyl. 

vinyl decal tutorial for plates @diyshowoff.com Send to cut and unload vinyl.

vinyl decal tutorial for plates @diyshowoff.com

Weed away excess vinyl from the design. 

vinyl decal tutorial for plates @diyshowoff.com

Apply transfer paper over the vinyl lettering. 

vinyl decal tutorial for plates @diyshowoff.com

Cut into individual designs. 

Rub the transfer paper over each piece. I just grabbed a hard plastic name tag with a straight edge. You could also use a credit or gift card. 

vinyl decal tutorial for plates @diyshowoff.com

Peel away wax paper backing, transferring vinyl to the transfer paper. 

vinyl decal tutorial for plates @diyshowoff.com

Place onto plate. 

vinyl decal tutorial for plates @diyshowoff.com

Rub with plastic card and remove transfer paper. 

vinyl decal tutorial for plates @diyshowoff.com

Simple but so many options. Try different colors, different fonts, personalize with quotes, monograms, shapes or words. 

Cute inexpensive gift to include with a card or gift basket or to use as party favors. 

Perfect for keeping tabs on jewelry, paperclips on a desk, keys in an entryway, spare change in the laundry room, Q-tips in the bathroom, etc. 

sparkle vinyl decal plate tutorial at diyshowoff.com hello vinyl plate decal tutorial at diyshowoff.com shine vinyl plate decal tutorial at diyshowoff.com hustle vinyl decal plate tutorial at diyshowoff.com kate spade inspired plate tutorial at diyshowoff.com wander vinyl decal plate tutorial at diyshowoff.com

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Decorate Your Rain Boots!

April showers bring May flowers! Dress up your rain boots by creating custom vinyl decals. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com

 

Materials:

Rain boots before:

DIY rainboots vinyl decal design tutorial at diyshowoff.com

What I did:

I created a design with umbrellas, rain clouds, raindrops and text in my Silhouette Design Studio software. Be sure to measure design area on boot and size vinyl design to fit. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com

Insert vinyl into the machine, vinyl side up. Adjust blade settings and send design to cut. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com

When cutting has finished, unload vinyl from machine. Weed away the excess vinyl that’s not a part of the design. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com

Apply transfer paper to vinyl. Rub with a credit card. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com

Remove wax paper back, transferring vinyl to sticky transfer paper. 

DIY rainboots vinyl decal design tutorial at diyshowoff.com

Place vinyl design onto rain boot. Rub with a credit card to transfer the vinyl to the boot.

DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com

Slowly peel away transfer paper.

DIY rainboots vinyl decal design tutorial at diyshowoff.com

Remember in step 1 where I mentioned measuring and sizing. Oops. I was a bit off. So I peeled up the vinyl, like stickers, and re-placed them for a better fit (not over a seam). 

DIY rainboots vinyl decal design tutorial at diyshowoff.com

Now I have cute custom rain boots! I also tested the vinyl adhesive using water and the vinyl is still “stuck”! 

DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com DIY rainboots vinyl decal design tutorial at diyshowoff.com

Lots of fun options to play with! Raining cats and dogs, dance in the rain, your name or a cute and trendy design. What would you create for your rain boots?

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Spring Bloom Pillow Cover

I’m still sort of holding my breath, hoping that spring truly has arrived after all of the teasing we’ve had recently. But regardless of the weather outdoors, I love to accessorize just a little bit with spring accents indoors. 

DIY Spring Pillow

spring pillow cover diyshowoff.com

Materials:

  • Accent pillow cover (make your own or purchase from Ikea or H&M)
  • Silhouette Fabric Ink Starter Kit from Happy Crafters – The Silhouette Fabric Ink Starter kit includes everything you might need to get started creating custom screen print designs. This kit includes: 2 oz. bottle of fabric ink in black, 9″ x 3ft roll of stencil vinyl, silhouette hook tool, mixing tray, sea sponge, foam brush, a download card worth up to 10 free Silhouette designs, an idea booklet and instruction guide, and an instructional DVD. With this kit, you have all the tools and materials needed to start creating all kinds of screen printing projects. Pair this with a Silhouette Cameo® or Portrait® vinyl cutter for designing and cutting graphics quickly using your stencil vinyl.

Silhouette fabric ink starter kit

What I did:

Using the Silhouette Design Studio Software, I created a spring design. There’s a promotional card in the starter kit for some fun free shapes but I created the text “Bloom” with a branch shape. 

Silhouette Design Studio spring bloom design

Load the tan stencil vinyl rough side up into the Silhouette Cameo. Adjust blade settings for vinyl cutting. 

Silhouette fabric ink tutorial

Send to cut then remove from the machine.  

Silhouette fabric stencil tutorial

Weed away lettering and shape from stencil. 

weeding vinyl fabric stencil

Peel away the white backing from the glossy transfer paper. Cover rough side of stencil with transparent transfer paper. Burnish using the plastic promotional card (or gift card). 

Silhouette fabric ink transfer paper tutorial

Peel away tan backing from stencil vinyl. 

Fabric Ink Kit tutorial

Place stencil onto pillow cover. Burnish using the plastic card. 

burnishing vinyl stencil

Peel away the shiny transfer paper. 

Happy Crafters Fabric Ink Kit tutorial

Paint design. I used a foam brush for the lettering and a sponge for the branch. 

painted pillow cover tutorial

Once paint is dry, remove stencil. 

painted spring pillow cover

Sew or glue pom pons onto the branches. 

Spring bloom pillow cover tutorial

Slip pillow into the pillow cover and display. Spring is in the air! 

Spring Pillow Cover at diyshowoff.com

 

spring bloom pillow at diyshowoff.com

 

spring pillow cover diyshowoff.com

 

See more spring ideas in the DIYShowOff project gallery!

spring DIY projects

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

DIY Window Vinyl Decal

I recently revealed our bathroom makeover

bathroom makeover after

and you may have noticed that the window is bare. 

Problem: I haven’t been able to decide on curtains…the length would be awkward with placement of the toilet. I like the natural light during the day since I use this space to get ready in the mornings. But I don’t like the lack of privacy even if it is on the second floor. Pictures of the window in the day time are tricky…but here goes!

DIY vinyl window decal tutorial at diyshowoff.com

Solution: I applied a lace contact paper {affiliate link} to the bottom window which is where someone from the outside looking up from a distance would be able to see someone standing in the bathroom with the light on at night. Then I created a fun decorative vinyl decal for the top window.

lace contact paper on bathroom window for privacy

Materials:

Tools:

  • Silhouette Cameo and Silhouette Studio Designer Software
  • Scissors
  • Credit/gift card for rubbing

What I did:

Using the Silhouette Studio Designer software, I created my design. I purchased a tree shape from the online Silhouette store and surrounded it with curved “Hotel & Spa” text since my new bathroom has a relaxing spa feel. 

bathroom window treatment

How to curve text: Click the circle shape on the left. Drag to size, shape and center on design. Next click the font button on the left and create your text. While the text box is surrounded with a green window, click the circle with a cross. Drag text to the inner or outer circle border. (You can also change the character spacing in the font tool.) 

Silhouette curved text tutorial

Next, select the circle again by clicking on it. Then click the scissors button in the right hand corner. Choose “no cut”. Now the text in the design will be cut but the circle won’t. (As you can see, I played around with rearranging my text too.)

Silhouette curved text

Load vinyl into the machine color/vinyl side up. Change blade and settings for adhesive vinyl cutting. Send design to cut. 

Happy Crafters vinyl tutorial

Silhouette vinyl window decal

Remove vinyl from the machine and trim to a more manageable size around the design.

Weed away the unused part of the vinyl design. 

vinyl weeding

Cover vinyl decal with transfer paper. Rub with a credit card.

adhesive vinyl tutorial

Clean window. 

Peel away paper backing, transferring the vinyl decal to the sticky transfer paper. 

transfer paper tutorial

Place design on window. Rub with a credit card and peel away transfer paper. 

bathroom window vinyl decal tutorial

DIY vinyl window decal

Ta-da! Now my window has some decorative type detail without curtains or a blind. I have privacy and natural light. What do you think?

day time

vinyl window decal tutorial

 

{It’s difficult to capture in a photo of a window in day light but it’s very visible in real life.}

bathroom window privacy idea

night time

vinyl window decal tutorial

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Valentine’s Day Decorating {Vinyl Decal Glass Top Table Runner}

I’m not quite late in terms of sharing my Valentine decorating, am I? I don’t do much…just a little here and there, mostly in the dining room. 

Valentine dining room decor

More pictures after a little vinyl tutorial: Having a vinyl cutting machine is GREAT for last minute decorating! Our reclaimed barn wood dining table is protected by a beveled glass top. And a glass top table is the perfect spot for an adhesive vinyl table runner just in time for Valentine’s day!

Valentine glass top table vinyl decals

You’ll need:

  • Adhesive vinyl from Happy Crafters in pink and soft pink
  • Transfer paper

Tools I used:

  • Silhouette Cameo
  • Silhouette Design Studio software
  • scissors
  • credit card/gift card

Happy Crafters Adhesive Vinyl

Using the Silhouette Design Studio software, I used different fonts to create Valentine text along with a few shapes from the online store.  Because I wanted to have the text reading different directions, I used the rotate tool to flip some of the text and shapes. 

Silhouette Design Studio software

Before sending the design to cut, I uploaded the vinyl into my machine color side up then changed my setting to cut adhesive vinyl. 

When cutting was complete, I removed and trimmed my vinyl design. Then inserted another sheet of vinyl and cut the design again. I used two sets of vinyl decals to create my table runner.  cutting adhesive vinyl

Next up is removing all of the negative part of the vinyl design. Simply remove all vinyl that’s not a letter or shape. 

weeding vinyl decals

Now it’s like a sheet of vinyl stickers. Not something you want to place letter by letter so apply a piece of transfer paper over top of the vinyl decals. 

Measure placement and alignment of where the vinyl decal table runner will go onto your glass top table. 

vinyl decal placement

Rub the vinyl decals with a gift card so that the adhesive vinyl transfer from the wax paper backing to the transfer paper. 

transfer paper

Remove wax paper backing. Sometimes I have to use my fingernail or thumbnail to help along the transfer. 

adhesive vinyl decal tutorial

Carefully align and place the vinyl decal with transfer paper onto the glass. 

glass top table vinyl decal

Rub with a gift card so that the vinyl transfers from the paper to the glass. 

transferring vinyl decal

Remove transfer paper. 

transfer paper vinyl decal

That’s it! Now the glass table top sports a sweet Valentine’s message!

adhesive vinyl Valentine centerpiece

Simply peel away the vinyl for easy removal.

Valentine table decor

More decorating around the DIYShowOff house: 

Valentine centerpiece

 

Valentine wreath

Valentine's day dining room decorating

Valentine Mantel

 

DIYShowOff Valentine Mantel

 

Valentine dining room decor

 

Valentine dining room decor

 

Valentine decor

 

See more Valentine’s crafts in the DIYShowOff project gallery

 

Valentine kitchen

 

Valentine decorating

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

How Wonderful Life is While You’re in the World – DIY sign tutorial

I think this lyric to “Your Song” by Elton John is the perfect accessory to the world map in our family room.  DIY sign

Materials:

  • Adhesive Vinyl – Happy Crafters
  • Transfer Paper
  • Scrap Wood Plank
  • Acrylic Craft Paint

Tools: Silhouette Cameo, scissors, gift card/credit card (for burnishing/rubbing), foam paint brush

Tutorial:

Paint scrap wood plank. Mine is is a 1×3 about 46 inches in length. Let dry. 

Using the Silhouette Studio software, I created my design utilizing “felt marker” font.  Silhouette design studio

Load the vinyl into the Silhouette Cameo vinyl side up and ‘send to cut’. Be sure to adjust the settings for vinyl. 

There are two ways to use vinyl as a stencil. If painting the letters, weed away the letters to create a stencil. I wanted to paint my sign (not the lettering), so I removed all of the negative part of the design, leaving the vinyl letters (like stickers). DIY sign tutorial

Apply transfer paper, sticky side down directly to the vinyl decal. Transfer paper ensures that everything is lined up properly when ‘transferring’. You could apply the vinyl in the same way you’d apply stickers, but keeping a straight line is a challenge!

Rub the transfer paper with a credit card or gift card to ‘transfer’ the vinyl to the transfer paper. Remove the wax paper backing.

Place vinyl (sticky side down) onto the wood plank. 

Rub with a gift card. 

Remove transfer paper (it may be a little tricky…I peel it away slowing, almost creating a crease in the transfer paper to get the vinyl decal to stick to the painted wood. 

Make sure all letters are nice and stuck. 

Paint the sign. I did a light coat using a sort of dry brush (foam brush) technique for a worn look. DIY wood plank sign tutorial

Before paint dries, carefully remove vinyl lettering.

Optional: sand and/or glaze for an antiqued, distressed look. Seal. Hang using picture hanging hardware or Command velcro strips. 

Perfect for a little Valentine sentiment, too. What song lyric would your sign display? How wonderful life is while your in the world. DIY Sign Tutorial

 

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

 

DIY Glitter Iron-On Vinyl Tutorial

The Chinese zodiac/new year follows the lunar calendar and begins January 31st. 2014 is the year of the horse. It’s a year for making efforts to improve yourself. Why not wear a reminder to do just that. It’s also the symbol for my word of the year for 2014 but more on that later this week.  iron on vinyl glitter decal tshirt tutorial

Did Santa bring you a Silhouette Cameo? Unpack that baby! There are so many cool things to create just waiting for your imagination! One of the things I love is the ability to create custom vinyl decals easily and that includes not just stencils or signs but dressing up my t-shirts too. Here’s how:

Materials:

  • t-shirt or sweatshirt. Give an old one a little pizzazz! Or purchase new if creating a gift.
  • Iron-on vinyl. I’m using Happy Face Glitter Iron On Vinyl in Pine Bling from Happy Crafters for this project. Big selection of fun printed, solid and glitter iron-on vinyl for DIY projects. 

Tutorial:

1. Create a design using the Silhouette Studio. I purchased a horse shape from the Silhouette online store and added text. 

iron on vinyl decal tutorial

2. For iron-on vinyl, you’ll need to “mirror” the design. I just ‘right click’ my design and flip horizontally. 

iron on vinyl tutorial

3. Load the vinyl into the machine glossy/sparkly/glitter side down {transparency side down}. Adjust settings. Recommended settings for cutting iron-on vinyl are blade 2, speed 8, thickness 5. Send to cut. 

iron on vinyl tutorial

4. My blade is dull from so much use and the glitter iron-on vinyl is thick so before removing from machine, I could tell it wasn’t a good all-the-way-through cut. I had to re-adjust my blade setting to 6 and send to cut again. Tip: Test yours before removing vinyl from the machine so that the not-so-good cut lines will match up with the newer cut lines if needed. You’ll want the vinyl to be cut but not the transparency. When cutting is complete, remove vinyl from the machine. Cut vinyl to a smaller more manageable size from the roll/sheet.  iron on vinyl tutorial

5. Weed away all negative vinyl (vinyl that is not a part of the design) from the adhesive transparency.

iron on vinyl tutorial

6. Position decal onto shirt. Cover with a cotton tea towel, napkin or fabric. Iron on high, pressing down 25-30 seconds on each part of the design (no steam). iron on vinyl tutorial iron on vinyl tutorial

7. Peel away the transparent shiny plastic. If part of the design starts to lift, replace transparent plastic, re-cover and iron again.  iron on vinyl tutorial iron on vinyl tutorial

8. All done! An old t-shirt, a new look and a fun reminder of your ‘word of the year’ to make 2014 awesome! 

iron on vinyl decal how-to

It’s certainly difficult to photograph the sparkle, not to mention take photos of myself wearing it. But you get the idea, right? It’s super glittery!

iron on vinyl decal tshirt tutorial

Isn’t that green glitter iron-on vinyl pretty? I’ll be using scraps for a glittery shamrock for St. Patrick’s Day too! Here’s another iron-on vinyl tutorial for a monogrammed t-shirt for more direction and inspiration.

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Custom DIY Decals – vinyl holiday labels

I don’t know about you but the change from fall to winter contributes to dry skin and having a bottle of lotion constantly on display isn’t exactly decorative so why not whip out a vinyl decal/label using a fun shape and text? I used my Silhouette Cameo and vinyl but you could substitute craft paper, glue, contact paper, decorative tape and/or stickers. It’s a cute DIY gift idea too. Here is what I did:

DIY gift set idea

Materials:

  • Bottle of Moisturizing Lotion (Dollar General) – you could also make your own and use a glass bottle or jar
  • Gold Vinyl from Happy Crafters
  • Transfer paper

Tools:

  • Silhouette Cameo

What I did:

Remove front label. I left the back label adhered so there was no mistaking the contents and ingredients. The front label pulled away clean for me but some may take a little elbow grease.

lotion bottle decal tutorial

Using my Silhouette Studio software along with a previously purchased deer shape and helvetica font, I created a design measuring small enough to fit on the front of the lotion bottle (roughly 3 x 3 inches).

Load vinyl color side up. I changed my blade settings for cutting vinyl and sent to ‘cut’. 

cutting vinyl decals

Weed away all ‘negative’ vinyl that isn’t a part of the design. 

deer decal

Add a piece of transfer paper to the front side of the vinyl decal and rub with a gift card or credit card.

vinyl decal label tutorial

Pull away the wax paper backing.

vinyl decal label tutorial

Place the vinyl decal/transfer paper onto the front of the lotion bottle and rub the design with a a gift card.

lotion label decal

Peel away the transfer paper. 

Vinyl lotion label decal DIY

Add a coordinating bow if desired. Now you have cute guest room accessory.

Deer lotion bottle DIY vinyl decal

Or create a holiday gift set by adding a super easy DIY ring/jewelry holder.

DIY gifts

I’m sharing the ring holder tutorial today over at Très Frugal – 30 days of DIY Gift Ideas hosted by Brittany at Pretty Handy Girl today. Hop over to check it out and to follow the entire series for some great gift ideas. 

diy gifts

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion are my own. See more projects at Happy Crafters blog.

HClogopngsmall

 

Karyna’s handmade tree for the Christmas Tree Party & Contest

Karyna's Christmas Tree

DIY Holiday Wall Decals

DIY vinyl holiday wall decals are perfect for adding some festive touches to existing decor during the holidays. Great for making new decor too! Last year I added gold vinyl lettering to a large mirror (Glory to God in the Highest).

Christmas Dining Room 2012

Christmas mirror

I also love using vinyl lettering to create signs or to place directly on the wall.

Reindeer Games Sign Tutorial

DIY chevron Christmas Reindeer Games sign

But this year, I have a large world map in the family room. I tested the vinyl on the canvas and it didn’t cause any damage so this project got the ‘green light’ for me! Yay! (Please do your own test before applying vinyl directly to canvas or art work.) If it didn’t work, plan B was to use vinyl lettering on a wood plank sign for above my canvas. or to add vinyl lettering to a laminated map poster. 

before {family room makeover}

family room makeover

MaterialsI used:

Tools: 

  • Silhouette Cameo

What I did:

I created my lettering for “Joy to the World” using my Silhouette Studio software.

Joy to the World Christmas lettering

*Incidentally, there is a nearly identical ‘world shape’ as shown on my canvas, so you could also cut out vinyl continents in any color and apply directly to the wall or onto a large piece of plyboard to create your own overall “Joy to the World” wall decals. 

Load the vinyl into the Silhouette Cameo color side up. 

Happy Crafters Tutorial

Adjust the blades as needed and send design to “cut”. 

Remove vinyl from machine and weed away negative space around lettering and centers from the letters o and e.

Joy to the World vinyl wall art

Place transfer paper over the design and rub with a credit card. 

Joy to the World vinyl wall art

Peel away waxpaper backing from lettering. If letters are sticking to the wax paper, replace transfer paper and rub again. Sometimes I have to use my thumbnail to help the vinyl transfer.

Place vinyl design with transfer paper onto the canvas.

Tricky! Rub the design without stretching the canvas. I supported the back side of the canvas with a book before rubbing. 

Joy to the World vinyl wall art

Peel away transfer paper. 

Joy to the World vinyl wall art

All done!

The best part is that I can remove the vinyl letters after the holidays without damaging my printed canvas (remember to test your art before attempting this – or create a specifically designated piece for the holidays). 

Joy to the World Christmas wall art

I also added “peace on earth” to my globe to help camouflage the area where numerous price tag stickers removed the map paper…

peace on earth globe

How are you adding vinyl to your holiday decor this year? 

Joy to the World Vinyl Decals on Map

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. 

HClogopngsmall