Design Style: Urban Classic

I’m often stumped when asked my decorating style. I tend to just do what I love. Our family room is a mix of modern with vintage, new with old, an “urban classic” style but with a bit more fun with pops of color.

I’ve recently been working on redoing the family room which is a mix of repurposed, thrifted, DIY and new. Vintage modern. Urban classic. It’s still a work in progress (I know. I know…I just revealed the family room makeover not long ago but it wasn’t feeling ‘just right’ so I’m slowly changing it. Again.) I love decorating. I love thrifting. I love DIY. But sometimes adding something new is just as important for achieving the look I love. Sometimes that means saving for a big ticket item but most of the time I’m working on a tight budget.

One of the elements you can’t miss in my family room is the set of Sauder Barrister Lane bookcases on either side of the fireplace surround. New but classic spin on the plain cubby-style shelving. I love the color/finish and the addition of vintage-looking name plates.

Two Barrister Lane bookcases give this wall and fireplace surround a built-in (but moveable) look.

I love the vintage vibe of the bookcases paired with a modern pattern like in this accent rug and colorful glass lamps:

And they’re versatile. So when I get the urge to rearrange, they’ll work in several other rooms in my home too.

Get the Look: For a bit of casual sophistication, Urban Classic reflects a smart, easygoing lifestyle through timeless decorating. Somewhat eclectic, this style focuss on mixing classic and found items to hint at a well-traveled taste. Urban Classic is full of sophisticated yet relaxed home design ideas with a healthy mix of materials. Colors are earthy and rich, while materials show age to suggest a loving history of use.

  • Find inspiration. Check out magazines, decorating blogs, ideas via Pinterest or a Google search. Sometimes inspiration can be found in art, fashion, one object, fabric patterns, catalogs, etc.
  • Mix repurposed, thrifted, DIY with new and modern (Sauder has a broad range of beautiful furniture at affordable prices) to create a room that reflects your style.
  • Personalize. Take what you love about your inspiration and put your own spin on it, making it fit your lifestyle, your personality.

Perfect timing: Before I even received this opportunity, I spied the Barrister Lane bookcases and knew right away that I wanted a set of two to flank either side of the vintage fireplace surround that you often see in my family room (sometimes I move it to the dining room). I couldn’t pass up the color, style, function and affordable price and ordered two of them online. THEN just a few days later, I received the offer to participate in the Sauder Get the Look campaign. Great timing, awesome coincidence! I purchased the product before the campaign became available to me. How perfect!

Purchase experience: The bookcases arrived and were simple to assemble by myself. The instructions were easy to read and the pieces clearly marked. There was however one piece missing from one of the packages. My first reaction was panic…would I have to box it back up and ship it back? (Sauder furniture is super heavy – not fun for shipping but definitely adds to the overall quality of product.) The answer: No. I simply went online to sauder.com and ordered a replacement part. Free-of-charge. It arrived within in a few days. No hassle! Great customer service – I was able to manage ordering the replacement part on a Sunday evening without even having to explain the situation to a sales representative or make an extra trip to the store or without having to return the product. Gotta love that!

What design style is most prevalent in your home? See more ‘Get the Look’ ideas from Sauder on Pinterest.

This is a sponsored conversation written by me on behalf of Sauder Woodworking. The opinions and text are all mine.


DIY Window Shelves for Plants

I recently shared my craft room tour. And as a little reward for cleaning up that chaos and getting organized, I treated myself to a little DIY project. I love one of the windows in this room. Here’s how it looked in the past:

vintage craft room

The window shown above nearly reaches from floor to ceiling and with the two different sized windows in the room (one tall window with trim original to the house/one high small window with no trim), window treatments always felt tricky or lopsided. 

So why cover that beautiful trimmed tall window at all? It faces the back of the house, it’s a second story window and it’s not a room for dressing or a need for privacy. I’ve always wanted to put shelves on a window for plants. Plenty of sunshine should assist in changing my luck with plants, right? 

Here’s what I did…

Materials:

  • (3) 1 x 4″ pine boards for shelves
  • (6) shelf brackets
  • Minwax Polyshades (Ebony)

I decided where I would attach the brackets to the window trim to calculate the measurement of my shelves.

measure

Then cut my shelves. 

window shelving tutorial

Sanded the rough edges and wiped them clean. 

window shelving tutorial

Then brushed on the Polyshades using a foam brush. I let it sit for a few minutes then wiped the stain away and let dry. I did all sides. (I may apply a wax finish to the wood shelves for further water-proofing but I was on a bit of a deadline.)

window shelving tutorial

Next I marked the holes for the brackets and drilled a pilot hole.

window shelving tutorial

Then I just screwed the brackets into the window trim/pilot hole (can always be patched with wood filler in the future). *Use a level to be sure they’re ‘level’. 

window shelving tutorial

Attach the wood shelves to the brackets with screws (be sure these screws are smaller than the shelf thickness so the screw doesn’t poke up from the bottom).  

It adds a bit of privacy without a long drapy curtain panel but still lets natural light into the room.  

window plant shelves at diyshowoff.com

It’ll take some maneuvering/removing plants to open the window but the shelves don’t interfere with the function. 

window shelves at diyshowoff.com window succulents

 

before

vintage craft room

after

Craft Room at diyshowoff.com

 

Facebook DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - Pinterest DIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+ photo Bloglovin_zps7a62ddb7.png photo instagram_zpsd219e830.png

Craft Room Tour

Have you been following along the Craft Rooms and Spaces series hosted by Angie at Country Chic Cottage? It’s so fun seeing where bloggers create, getting ideas and motivation to maybe initiate some spring cleaning and organization in your own space?

DIY Show Off craft room tour

Thanks to Angie for the invitation to participate! I had no choice but to finally put things away. Here’s my chaotic craft room when I agreed to join the series…

craft room mess before

Yikes!

I’ve made some changes and cleaned things up for your arrival today. Ready for oodles of pics? There’s lots to see!

Craft Room at diyshowoff.com

Looking into the room from the hall (the resin button plaques on the wall are several years old, so no source to list).

Craft Room Tour at diyshowoff.com

One first thing you’ll notice is this room is PACKED full. But when everything is organized and tidy and in it’s place, its a great space for getting creative. The old farmhouse dining room table serves as a great workspace.

diyshowoff craft space

The skirt is sewn into simple custom sized rod pocket panels and attached using tension rods on 3 sides. I’m ready for an updated fabric/pattern but what I really love about the skirt is that it hides even more storage (things not so pretty to display, boxes of supplies and such) under the table. 

DIYShowOff Craft Room

The walls are lined with inexpensive shelving units, some tucked for a perfect fit against the back wall, providing TONS of storage and organization. A string of lights adds a fun festive feel.

DIYShowOff craft room tour diyshowoff home office craft room

A small DIY desk area holds our desktop computer, although I’m more inclined to work from my laptop in the living room most days. 

work space at diyshowoff.com

I love the mix of old crates, baskets and vintage finds for storing craft supplies, mason jars for scrap ribbon by color…

diyshowoff craft room storage craft room organization at diyshowoff.com craft paint storage at diyshowoff.com craft room tour storage for craft room vintage craft room storage at diyshowoff.com craft supply storage at diyshowoff.com

I recently added some shelves to the window for plants to bring some “life” to the space. 

diyshowoff craft room

 I love that this window sits low, close to the floor. The shelves add a little privacy (second floor) but still allow for lots of natural light to flood the room.

window plant shelves at diyshowoff.com window shelves at diyshowoff.com window succulents

I don’t remember where I got the light fixture (maybe Urban Outfitters years ago) but I really like the cage and sometimes clip cards or paint swatches there. 

craft room light fixture at diyshowoff.com

The walls are filled with a mix of fun frames collected over time, some with family photos, others just random art or thrift store finds and continues to grow here and there. 

gallery wall at diyshowoff.com Craft Room photo wall at diyshowoff.com Craft Room gallery wall

Pet Silhouette Art Tutorial

Framed Pet Silhouettes on Burlap

A DIY chalkboard + cork board + burlap message center helps keep ideas and schedules more organized. 

DIY burlap message center Craft Room message center

A lot going on, right? A LOT of junk which I’ve unsuccessfully tried to downsize but perhaps one day I’ll grasp the truth that if I haven’t used it in 10 years, I probably never will but I’m still waiting for that day to arrive.

Craft Room at diyshowoff.com

Ready to see more craft spaces? Start the tour at here to see Angie’s super organized space. Or if you’re visiting from the creative room at Major Hoff Takes a Wife, welcome friends! I’m so glad you stopped by! Or following along and ready for the next awesome craft room tour on the list? Head over to Homemadeville!

craftroomtourbutton

Easy DIY Indoor Outdoor Honeycomb Wall Art

As a member of the Lowe’s Creative Ideas team, I have the opportunity to participate in monthly DIY challenges. One of the themes for April is outdoor wall art. I just happen to have a bare outdoor wall. This easy DIY indoor/outdoor honeycomb wall art project is super easy and perfect for decorating an outdoor wall in our covered party patio area. 

easy DIY hexagon wall art at diyshowoff.com

 Materials I used:

hexagon wall art tutorial at diyshowoff.com

What I did:

I spray painted the pieces of the drawer organizers (not assembled) using Valspar Outdoor Spray Paint. I sprayed one side Peacock Blue and let dry about 6 hours then flipped and sprayed the other side Koi Pond and let dry overnight. 

Once the paint was dry, I assembled my pieces. The honeycomb-shaped organizers simply snap together. No tools required!

easy honeycomb wall art tutorial

Since I have 3 sets, I assembled two sets with closed ends and one with open ends (both options shown on pamphlet with instructions included in the box).

easy DIY hexagon honeycomb wall art

You could even leave them white = the only DIY is snapping them together! I hung mine using Command outdoor light clips. 

Face on: 

Easy DIY hexagonhoneycomb wall art tutorial at diyshowoff.com DIY honeycomb hexagon wall art at diyshowoff.com easy hexagon wall art at diyshowoff.com

From the side:

honeycomb wall art tutorial at diyshowoff.com DIY honeycomb wall art at diyshowoff.com hex wall art at diyshowoff.com

From above: 

DIY hexagon wall art tutorial at diyshowoff.com

They’re very light weight so not ideal for displaying heavy items but a great way to add color, dimension and interest to an otherwise plain outdoor or even indoor wall. I tucked in a few succulents for now.

outdoor hexagon patio wall art at diyshowoff.com

My covered patio area still hasn’t been cleaned up for summer. I just grabbed some accessories for photo-staging. Pardon the leaves and dirt!

outdoor honeycomb patio wall art at diyshowoff.com

The outdoor hexagon/honeycomb wall art is going to look great on that back wall when the patio is cleaned up. See the patio when it IS ready for summer lounging and entertaining here.

barn patio makeover

LCI Spring

I received a Lowe’s gift card to complete this challenge. Opinion and above idea is 100% my own. More DIY ideas at Lowe’s Creative Ideas, follow Lowe’s on InstagramPinterest and sign up for the Creative Ideas magazine and app!  

More of my Lowe’s Creative Ideas challenges:

DIY hanging organizer - Pantone radiant orchid DIY Chalk Finish Paint Recipe pipe shelving how to DIY foldable luggage rack tutorial DIYShowOff tire flower planter tutorial at DIYShowOff LCR dice game tutorial

Spring Bloom Pillow Cover

I’m still sort of holding my breath, hoping that spring truly has arrived after all of the teasing we’ve had recently. But regardless of the weather outdoors, I love to accessorize just a little bit with spring accents indoors. 

DIY Spring Pillow

spring pillow cover diyshowoff.com

Materials:

  • Accent pillow cover (make your own or purchase from Ikea or H&M)
  • Silhouette Fabric Ink Starter Kit from Happy CraftersThe Silhouette Fabric Ink Starter kit includes everything you might need to get started creating custom screen print designs. This kit includes: 2 oz. bottle of fabric ink in black, 9″ x 3ft roll of stencil vinyl, silhouette hook tool, mixing tray, sea sponge, foam brush, a download card worth up to 10 free Silhouette designs, an idea booklet and instruction guide, and an instructional DVD. With this kit, you have all the tools and materials needed to start creating all kinds of screen printing projects. Pair this with a Silhouette Cameo® or Portrait® vinyl cutter for designing and cutting graphics quickly using your stencil vinyl.

Silhouette fabric ink starter kit

What I did:

Using the Silhouette Design Studio Software, I created a spring design. There’s a promotional card in the starter kit for some fun free shapes but I created the text “Bloom” with a branch shape. 

Silhouette Design Studio spring bloom design

Load the tan stencil vinyl rough side up into the Silhouette Cameo. Adjust blade settings for vinyl cutting. 

Silhouette fabric ink tutorial

Send to cut then remove from the machine.  

Silhouette fabric stencil tutorial

Weed away lettering and shape from stencil. 

weeding vinyl fabric stencil

Peel away the white backing from the glossy transfer paper. Cover rough side of stencil with transparent transfer paper. Burnish using the plastic promotional card (or gift card). 

Silhouette fabric ink transfer paper tutorial

Peel away tan backing from stencil vinyl. 

Fabric Ink Kit tutorial

Place stencil onto pillow cover. Burnish using the plastic card. 

burnishing vinyl stencil

Peel away the shiny transfer paper. 

Happy Crafters Fabric Ink Kit tutorial

Paint design. I used a foam brush for the lettering and a sponge for the branch. 

painted pillow cover tutorial

Once paint is dry, remove stencil. 

painted spring pillow cover

Sew or glue pom pons onto the branches. 

Spring bloom pillow cover tutorial

Slip pillow into the pillow cover and display. Spring is in the air! 

Spring Pillow Cover at diyshowoff.com

 

spring bloom pillow at diyshowoff.com

 

spring pillow cover diyshowoff.com

 

See more spring ideas in the DIYShowOff project gallery!

spring DIY projects

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Eclectic Guest Bedroom Ideas

When I shared our family room and kitchen in the What’s Your Style Series, one style those rooms (and all rooms in my home) share is “eclectic”.

Visiting from the beautiful bedroom at Shabby Love? Welcome, friends!

When you do what you love, specifically on a small budget; thrift stores, flea markets, estate sales, yard sales and Craigs List become favorite sources for unique, eclectic decor. Our guest bedroom is no exception. 

blue orange and gold eclectic guest bedroom at diyshowoff.com   blue orange and gold guest room bed at diyshowoff.com blue orange and gold guest room bed at diyshowoff.com guest bedroom at diyshowoff.com eclectic guest room at diyshowoff.com

and a mix of old and new.

mixing old and new - eclectic guest bedroom at diyshowoff.com

Small budget? Wrap a canvas you already own with pretty wrapping paper to freshen up old decor. 

wrapping paper canvas art at diyshowoff.com

Layer the bed with a folded top sheet topped with a throw blanket. Cat optional. 

eclectic guest bedroom at diyshowoff

Eclectic: mismatched furniture, a mix of pattern and colors, collected-over-time gallery wall, DIY accents, a painted floor and flea market finds. 

blue orange gold eclectic guest bedroom at diyshowoff.com mixed media gallery wall at diyshowoff.com guest bedroom redo at diyshowoff.com eclectic guest bedroom DIY cat window seat

I’m in the process of planning a re-do on our other guest room/dressing room. Our master bedroom is a disaster since the day we moved in but always seems to get pushed further down the priority list. What’s your style and favorite bedroom in your home?

Posts related to this room/DIY in this bedroom:

diy luggage rack

easy DIY cat window seat

chevron Shape Tape tray

painted dresser tutorial at diyshowoff.com

See more of my style in the DIY Show Off Home Tour.

Ready for some more bedroom inspiration? Check out these bedroom beauties in the What’s Your Style Series:

what's your style series

Ready for a little inspiration to get started on freshening up your bedroom? Check out the giveaway using the widget below to be entered to win a $100 gift card to Online Fabric Store. Good luck!

a Rafflecopter giveaway

Easter Succulent Garden

Remember that one time last year when I made a wire cloche for a succulent terrarium/garden? It’s a miracle! I haven’t managed to kill the plants! I love that succulents are so hardy, nearly fool-proof. Well, for Easter, I’ve done a little re-arranging in my little succulent garden. 

DIY wire succulent garden

{DIY wire cloche for succulent garden}

It’s still alive and thriving but it was looking a bit neglected and sad (okay, so some of the plants didn’t make it) but I took a few minutes to freshen it up for spring, trying to make up for my non-green thumb. I saw something similar somewhere one time but for the life of me, can’t find it now to properly credit that glimpse of inspiration. Here’s what I did: 

Easter succulent garden at diyshowoff.com

  • I added water so the soil was wet. I broke up the compacted soil with a fork then added half of an empty toilet paper roll. I covered it with soil and pebbles then added a rock to the side…just like Jesus’ tomb. 
  • Using twigs from my yard and scrap floral wire, I created 3 little stick crosses and tucked them near the back. 

succulent garden for Easter at diyshowoff.com Easter succulent terrarium at diyshowoff.com Easter succulent garden - diyshowoff.com He is Risen succulent garden at diyshowoff.com

When Easter decorating becomes bunnies, eggs, chicks and candy overload (which I do love too, don’t get me wrong!), it’s nice to have a sweet reminder of the true reason for celebrating Easter. He is risen! 

Jesus' tomb succulent garden at diyshowoff.com

 He is Risen, indeed. xo 

He is Risen! succulent garden at diyshowoff.com

 Update: Here are links to some more (thanks for sharing, Graziela!)

Dresser Makeover

I recently had an opportunity to try out Maison Blanche furniture paint and just happened to have an old painted dresser that needed a fresh new look. If you know me, you know I like to rearrange furniture from room to room and as is (before) just wasn’t versatile. Time for a change! 

dresser makeover before

No prep? You got it! No stripping, no sanding, no priming! Count me in! Here is the dresser before. I wiped it down to clear away the dirt and dust, removed the drawer pulls then jumped right in. Color is La Bonne Terre…to me it looks like a very light putty (sort of an ivory with a gray tone). 

painted dresser prep

Being a DIY’er, I paint. A lot. And one of the things that makes a paint brand my favorite is the paint’s consistency. Maison Blanche paint did not disappoint! It’s thick. It was love at first sight. Plus! If I wanted it even thicker, I could leave the lid off to thicken it up without it developing that plastic-y painty film. Pretty cool!  

Maison Blanche furniture paint

I used a regular 2″ brush and gave the dresser coat of paint then started where I began and did a second coat. It goes on so nice and smooth. The paint had a light odor but it wasn’t unpleasant. 

Dresser Makeover furniture paint tutorial

The next morning, I did a third coat and let it dry for about six hours. The finish is so soft and smooth. In the afternoon, using an old sock, I applied a coat of gray Lime Wax. 

Maison Blanche Lime Wax

After 15-30 minutes, I buffed the wax finish.

It’s difficult to tell but it gives the paint a subtle pretty patina (transparent gray). I let everything dry overnight (because my oil rubbed bronze spray painted drawer pulls were still drying anyway). Then added the pulls and the result…

Dresser Makeover after

…is awesome, isn’t it? Much better! Get your own color at Shannon’s shop, here!

dresser styling

I could re-arrange, style and decorate all day, how about you?

beachy decor

La Bonne Terre with Gray Lime Wax

painted dresser tutorial at diyshowoff.com

Need some more examples and inspiration? You’ll want to check these out: 

 Bayou Blue with White Lime Wax at Fox Hollow Cottage

Fox Hollow Cottage

Magnolia with White Lime Wax at Mom 4 Real

mom 4 real

*I received Maison Blanche paint and Lime wax in exchange for a review. As always – opinion and experience is my own. If I didn’t like it, I wouldn’t be sharing about it! 

DIY Window Vinyl Decal

I recently revealed our bathroom makeover

bathroom makeover after

and you may have noticed that the window is bare. 

Problem: I haven’t been able to decide on curtains…the length would be awkward with placement of the toilet. I like the natural light during the day since I use this space to get ready in the mornings. But I don’t like the lack of privacy even if it is on the second floor. Pictures of the window in the day time are tricky…but here goes!

DIY vinyl window decal tutorial at diyshowoff.com

Solution: I applied a lace contact paper {affiliate link} to the bottom window which is where someone from the outside looking up from a distance would be able to see someone standing in the bathroom with the light on at night. Then I created a fun decorative vinyl decal for the top window.

lace contact paper on bathroom window for privacy

Materials:

Tools:

  • Silhouette Cameo and Silhouette Studio Designer Software
  • Scissors
  • Credit/gift card for rubbing

What I did:

Using the Silhouette Studio Designer software, I created my design. I purchased a tree shape from the online Silhouette store and surrounded it with curved “Hotel & Spa” text since my new bathroom has a relaxing spa feel. 

bathroom window treatment

How to curve text: Click the circle shape on the left. Drag to size, shape and center on design. Next click the font button on the left and create your text. While the text box is surrounded with a green window, click the circle with a cross. Drag text to the inner or outer circle border. (You can also change the character spacing in the font tool.) 

Silhouette curved text tutorial

Next, select the circle again by clicking on it. Then click the scissors button in the right hand corner. Choose “no cut”. Now the text in the design will be cut but the circle won’t. (As you can see, I played around with rearranging my text too.)

Silhouette curved text

Load vinyl into the machine color/vinyl side up. Change blade and settings for adhesive vinyl cutting. Send design to cut. 

Happy Crafters vinyl tutorial

Silhouette vinyl window decal

Remove vinyl from the machine and trim to a more manageable size around the design.

Weed away the unused part of the vinyl design. 

vinyl weeding

Cover vinyl decal with transfer paper. Rub with a credit card.

adhesive vinyl tutorial

Clean window. 

Peel away paper backing, transferring the vinyl decal to the sticky transfer paper. 

transfer paper tutorial

Place design on window. Rub with a credit card and peel away transfer paper. 

bathroom window vinyl decal tutorial

DIY vinyl window decal

Ta-da! Now my window has some decorative type detail without curtains or a blind. I have privacy and natural light. What do you think?

day time

vinyl window decal tutorial

 

{It’s difficult to capture in a photo of a window in day light but it’s very visible in real life.}

bathroom window privacy idea

night time

vinyl window decal tutorial

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

DIY Hanging Organizer (for peg hooks)

How do you add a fun pop of color to an otherwise neutral room? Try Pantone’s Color of the Year for something you may not normally choose. The Lowe’s Creative Idea March challenge was to use Valspar’s Radiant Orchid. Just a small touch adds elegance to my white and gray space. 

Pantone Color of the Year Radiant Orchid

Inspired by PB’s Gabrielle system, I created a wooden peg hook organizing caddy from scrap wood. 

DIY Hanging Organizer Tutorial

Materials I used: Most of my wood was purchased at Lowe’s and is left over from previous projects with the exception of the .50 yard sale find piece shown below. Adjust measurements according to your own needs or scrap wood measurements. Inexpensive pine works well for this project.

  • 1″ x 10″ x 18 1/2″ (back)
  • 1″ x 6″ x 18 1/2″ (bottom)
  • 1″ x 2″ x 4″ (sides)
  • 1″ x 2″ x 18 1/2″ (front)
  • 1″ deep (or however thick your peg hook rack is)  x 1″ tall  x 6″ wide (back stop piece)
  • Gorilla Wood Glue
  • 1 1/2″ wood screws
  • Wood filler
  • Valspar Radiant Orchid 

What I did:

Mark the center top of the back piece of wood. Hold up to a peg on your coat rack, lining the center with the center of a peg. On the wood, mark the center of each peg placement.

DIY peg hook caddy tutorial

Decide which hole saw bit is just a little bigger than the pegs. 

DIY peg hook caddy tutorial

You’ll want your holes to be near the top end. I used a ruler to measure down about 2″ from the top and a level to make a cross mark to show the center of each hole. Drill tiny pilot holes where the pencil marks meet.

DIY peg hook caddy tutorial

Attach the hole saw bit to your drill and using the pilot hole as a guide for the center drill bit, drill/cut holes. I think our hole saw bit is a little dull so the back side of my wood is splintered. (Thankfully no one will see that side!)

DIY peg hook caddy tutorial

Sand and wipe clean all wood pieces. Hang on pegs to ensure holes line up.

DIY peg hook caddy tutorial

Using wood glue, wood screws and clamps, assemble your caddy and let dry. I attached my screws from the bottom and back so they weren’t seen but you could also countersink screws, fill and sand.

DIY peg hook caddy tutorial

I thought that was it for the construction until I tested it hanging on my peg hooks. Oops, front heavy. Using just wood glue and a clamp, I attached the back stop piece to the center bottom of the back. This ensures that the caddy will hang level.

DIY peg hook caddy tutorial

Using wood filler, fill all seams and cracks. Let dry, sand smooth and wipe clean. 

DIY peg hook caddy tutorial

Paint the entire wood caddy. Mine took two coats. Radiant Orchid wouldn’t have been my first choice but it’s growing on me and it’s nice to do something bold and fun for a change. I love the Valspar sample size paint…more than enough and perfect for adding colorful accents. Down the road all it takes is a new coat of a different color to re-freshen things up. 

DIY peg hook caddy tutorial

 

Now I have a shelf/tray for decorative items, toiletries in the bathroom

bathroom organization - DIY peg hook hanging shelf

DIY hanging peg hook organizer

hanging peg hook organizer

bathroom peg hook hanging organizer

Great for keys, wallet, sunglasses, change, cell phone near the door in the mudroom or entryway. 

Peg Hook Hanging DIY Organizer

DIY peg hook mudroom entryway organizing hanging caddy

PB inspired peg hook shelf caddy organizer

My peg hook is located in my bathroom but I’d really love to have something like this near the door as well. How about you? 

More DIY ideas at Lowe’s Creative Ideas, follow Lowe’s on InstagramPinterest and sign up for the Creative Ideas magazine and app!    

LCI

*Disclaimer: As a member of the Lowe’s Creative Ideas Creators and Influencers network, I received a Lowe’s gift card to complete this challenge. As always, all ideas and opinions are in my own words. The blog post above is what worked for me. Results may vary. Remember to work in a well-ventilated area and to take the proper safety precautions.

DIY & Show Off: That DIY Party Decorating & Home Accents Highlights

Looking for some DIY decorating and home accent inspiration? I’ve gathered some favorites from January’s That DIY Party: 

That DIY Party highlights - January 2014

Cute curvy coat rack {repurposed table legs} from Denise on a Whim repurposed table legs coat rack - Denise on a Whim

Brrr! Baby it’s cold outside! Embracing it with a winter mantel at the Happy Housie…love the pine cone pom pom garland!

winter mantel @theHappyHousie

Loving gold? Me too! The gold leaf tray at Homey Oh My is a great way to display jewelry. 

gold leaf jewelry tray @HomeyOhMy

Kim’s beachy neutral Valentine’s mantel at Sand & Sisal is sweet for all year long. 

neutral beachy Valentine mantel @SandandSisal

When your bedroom makeover is on a tight budget, check out Corey’s great tutorial for making your own duvet cover at Tiny Side Kick

how to make a duvet cover @TinySideKick

 

Who wants these? Yep, me too! See the great DIY rustic floating shelves tutorial at Tiny Side Kick. 

floating shelves tutorial @TinySideKick

Lisa’s DIY Ikea wall light hack at Shine Your Light - not only just as beautiful as her inspiration but way more budget friendly too!

Ikea wall light hack @ShineYourLightBlog

Looking for some easy sweet DIY wall art? The DIY sweetheart hoop at Sugar Beans fits the bill. So cute!

Sweetheart Hoop Art @SugarBeans

for the little ones…

Oh.My.Goodness! Isn’t this the most darling thing ever? It’s a DIY retro play kitchen at Imperfectly Imaginable

DIY play kitchen @ImperfectlyImaginable

Need a place to hide away until spring arrives? I’d love to hole up in this DIY play tent at the DIY Mommy. Operation hibernation commence. 

DIY play tent tutorial @theDIYMommy

Remember to pin from the original source. See more DIY highlights on That DIY Party Pinterest Board for easy re-pinning…

thatdiyparty.pinboard

Have a DIY project to share? Well head on over to “show off” your DIY…

That DIY Party

Valentine’s Day Decorating {Vinyl Decal Glass Top Table Runner}

I’m not quite late in terms of sharing my Valentine decorating, am I? I don’t do much…just a little here and there, mostly in the dining room. 

Valentine dining room decor

More pictures after a little vinyl tutorial: Having a vinyl cutting machine is GREAT for last minute decorating! Our reclaimed barn wood dining table is protected by a beveled glass top. And a glass top table is the perfect spot for an adhesive vinyl table runner just in time for Valentine’s day!

Valentine glass top table vinyl decals

You’ll need:

  • Adhesive vinyl from Happy Crafters in pink and soft pink
  • Transfer paper

Tools I used:

  • Silhouette Cameo
  • Silhouette Design Studio software
  • scissors
  • credit card/gift card

Happy Crafters Adhesive Vinyl

Using the Silhouette Design Studio software, I used different fonts to create Valentine text along with a few shapes from the online store.  Because I wanted to have the text reading different directions, I used the rotate tool to flip some of the text and shapes. 

Silhouette Design Studio software

Before sending the design to cut, I uploaded the vinyl into my machine color side up then changed my setting to cut adhesive vinyl. 

When cutting was complete, I removed and trimmed my vinyl design. Then inserted another sheet of vinyl and cut the design again. I used two sets of vinyl decals to create my table runner.  cutting adhesive vinyl

Next up is removing all of the negative part of the vinyl design. Simply remove all vinyl that’s not a letter or shape. 

weeding vinyl decals

Now it’s like a sheet of vinyl stickers. Not something you want to place letter by letter so apply a piece of transfer paper over top of the vinyl decals. 

Measure placement and alignment of where the vinyl decal table runner will go onto your glass top table. 

vinyl decal placement

Rub the vinyl decals with a gift card so that the adhesive vinyl transfer from the wax paper backing to the transfer paper. 

transfer paper

Remove wax paper backing. Sometimes I have to use my fingernail or thumbnail to help along the transfer. 

adhesive vinyl decal tutorial

Carefully align and place the vinyl decal with transfer paper onto the glass. 

glass top table vinyl decal

Rub with a gift card so that the vinyl transfers from the paper to the glass. 

transferring vinyl decal

Remove transfer paper. 

transfer paper vinyl decal

That’s it! Now the glass table top sports a sweet Valentine’s message!

adhesive vinyl Valentine centerpiece

Simply peel away the vinyl for easy removal.

Valentine table decor

More decorating around the DIYShowOff house: 

Valentine centerpiece

 

Valentine wreath

Valentine's day dining room decorating

Valentine Mantel

 

DIYShowOff Valentine Mantel

 

Valentine dining room decor

 

Valentine dining room decor

 

Valentine decor

 

See more Valentine’s crafts in the DIYShowOff project gallery

 

Valentine kitchen

 

Valentine decorating

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Pantry Lighting Details

Some of you were wanting more details on the lighting when I shared the pantry reveal. The lighting in the open pantry area was a challenge. 1. There was no overhead/ceiling light to begin with. 2. Walls and ceiling are plaster. 3. Outlet was old and controlled by a switch on the wall. 

farmhouse pantry

Electrical work for the lighting was not DIY. My husband has installed recessed lighting in the kitchen but he was able to run electrical from the previously installed ceiling light, so it wasn’t quite so challenging. For the pantry area, no previous lighting meant pulling the wires from the wall to the ceiling. He started with drilling holes in the plaster wall and ceiling but the wood beam where wall meets ceiling had us realizing this job was ‘over our heads’ and not just literally. It was at this point that we decided to hire an electrician.

outlets

Then after some thought and to keep labor costs down, I let the electrician know that I wanted the wiring to run on the outside of the wall. He changed the old outlet near the floor (the old type that meant I needed an adapter anytime my plug had three prongs), added another outlet a little higher up to accommodate the microwave sitting on the pantry shelf (so I wouldn’t have to drill holes into the wood shelves for the cord to reach down to the lower outlet) and ran the lighting wiring up the wall, to the ceiling with a 90 degree turn to place the lighting. He also made the switch work for the lighting only, disconnecting the switch from the outlets. In hind site, I think this was something we could have done, but when in doubt, seek professional advice! 

connecting light fixtures

pantry lighting

Cord covers for the wiring from outlets, along the outside of the plaster wall, along the ceiling and connecting each individual light fixture.

I centered the lighting from the front edge of the shelving to the other wall and since I chose pendant lights, I made sure they were out of the way of an opening door. 

Then with the help of FrogTape® Multi-surface, I painted the track oil rubbed bronze. cord cover

I simply taped off either side of the conduit track along the wall and ceiling with my FrogTape and used my thumbnail to activate the PaintBlock® Technology. Then just painted the track. The oil rubbed bronze paint is sticky since it’s oil based so drying time is longer but still worth the work. It took two coats. 

oil rubbed bronze paint

As soon as I finished applying the second coat, I removed the FrogTape. Nice and clean! Note: paint will take a long time to cure!

removing FrogTape

Painting the conduit the same color as the walls and ceiling would help disguise it more but I think the oil rubbed bronze against the white ceiling adds to the industrial charm, don’t you? Especially with the pipe shelving.

RustOleum Oil Rubbed Bronze

I love it!

industrial pantry lights with wall track

Project Supplies:

farmhouse industrial pantry lighting

 We also added a dimmer…

farmhouse pantry

 

{open pantry reveal}

FrogTape Blog Squad

Disclaimer: I received compensation to complete this project for using FrogTape® products. All opinions, projects and ideas are based on my own experience. See the  FrogTape® Blog Squad for more inspiration!

Bathroom Makeover

The other day I shared the before and after bathroom transformation. I’ve gone from sitting and staring all day long at our recently finished open pantry (makeover here) to wanting to sleep in my new peaceful bathroom. Since the bathroom had was a nightmare before, ANYTHING would look good after. This is what we got with this old farmhouse…

Before – yikes! bathroom makeover before

And this is the potential I saw. I’m in love with the soft peaceful ‘after’ results! Bathroom Makeover

Bathroom Makeover Details at DIYShowOff

Paint: Those walls! Believe me, I did a good scrubbing but is there any better way to really clean up walls than applying a fresh coat of paint? Love this color! Valspar Pale Linen: Depending on light, sometimes it has a soothing blue tint, sometimes more of a gray/white tone but definitely a tranquil light blue color.

Vanity: The gorgeous Huntshire vanity with marble countertop and Talia faucet set from Virtu USA is the luxurious center of attention! Check out the beautiful detail and gorgeous espresso color.

Virtu USA Huntshire vanity

Metallics: Mixing the silver finishes like the brushed nickel faucets, polished nickel sconces, polished nickel vanity knobs, satin nickel curtain rod add just the right amount of bling!

Virtu USA Talia faucet - DIYShowOff bathroom makeover

The vanity comes with beautiful antique gold hardware which I’ll re-use on another piece of furniture since I swapped them out for these beautiful polished nickel knobs.

polished nickel knobs

Pottery Barn Bevel Mirror: Go big or go home! {Heavy! Molly bolts included.} The mirror’s beveled mirror frame is the perfect glamorous accessory reflecting light and the illusion of more space into this small bathroom. 

bevel mirror

Lighting: Drool-worthy. ::sigh:: Thanks to LampsPlus for the stunning lighting! {Hudson Valley Monroe polished nickel adjustable wall lights} These are just the icing on the cake, aren’t they? Definitely my most favorite fixture in my home!

Lamps Plus Monroe Adjustable Arm Sconce

Floor: I did this all by myself! Would you believe they’re vinyl tiles? Easy to install and grout (use grout for vinyl) gives it a look so similar to real marble but without the maintenance or cost and installed in just a few hours! Check back for the tutorial.

grouted vinyl floor tiles - diyshowoff bathroom makeover

 The tub and shower will get a makeover later this year. In the meantime, I “framed” the bathtub nook/shower curtain with curtains (difficult to photograph that side of the room!)…

bathroom curtains

bathroom makeover diyshowoff

Storage to the left of the bathtub/shower:

bathroom storage

Built in storage cabinet to the right…

bathroom storage cupboard

 Floating shelves and baskets provide more storage options. 

DIYShowOff bathroom shelves

Because there is no such thing as too many photos:DIYShowOff Bathroom Makeover LampsPlus Monroe Adjustable Wall Sconce

Bathroom makeover - towel nook Farmhouse Wares soap gift set - diyshowoff bathroom makeover DIYShowOff bathroom accessories DIYShowOff bathroom lighting from LampsPlus Bathroom storage DIY bathroom makeover towel hooks - diyshowoff bathroom makeover bathroom makeover - diyshowoff

I’ve received a lot of questions about some of the accessories and fixtures shown above. Here’s a source list. Click the images for to be redirected. 

DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover bathroom makeover at diyshowoff.com DIYShowOff bathroom makeover DIYShowOff bathroom makeover - Valspar Pale Linen DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover DIYShowOff bathroom makeover

Still have a question? Let me know in the comment section and I’ll get right back to you. Thanks so much for stopping by! 

Don’t forget to swing by to enter to win the Virtu USA Dream Bathroom giveaway to get started on creating your dream bathroom makeover. Easy to enter, lots of prizes! 

Ready for some more bathroom makeover inspiration? Check out these awesome blog friends for more:

Linking up to: 

Bathroom Before and After

Hello DIY friends! Let’s talk bathroom makeovers! Do you have an embarrassment of a bathroom? Outdated? Blah? Boring? Frightening? I know the feeling. Read on, my friend. You just may find yourself in a position to give your bathroom a serious facelift thanks to Virtu USA! bathroom makeover before and after

There are two bathrooms upstairs in our home. The master bathroom is the smaller of the two (remember, old farmhouse = bathrooms were not a part of the original house plans) and the bathroom I’m about to show you. One for my hubby (the master) and one for me (this one). I know you’re going to be envious that I have had this gem all to myself for a couple of years. Labeled the “girls’ bathroom”, welcome to my own little private oasis…  bathroom makeover before Gag! Because no one sees the upstairs main bath except those who live here, it hasn’t been at the top of the DIY priority list in the 7 years since we moved in. It was functional and clean even if it was super ugly and outdated. Sort of a hurry up, shower, brush your teeth, throw on some makeup and get the heck out of this room! But a less desirable (to put it nicely) “before” makes for a magical “after”. This girl has a happy ending for sure! DIYShowOff Bathroom Makeover Vurtu USA When the opportunity to work with Virtu USA came up, it was just the motivation I needed to finally FINALLY rip out the old cheap doorless vanity (will have a new life as storage in the barn). The old medicine cabinet with Hollywood dressing room lights (that’s what those lined up round bulbs remind me of) became a roadside treasure for someone who must have needed it. My heart didn’t break as we tossed the old peeling up vinyl and I think the bathroom cried tears of happiness when I painted those poor sad walls. bathroom before Tiling the tub and shower surround will have to wait until later this year but that didn’t keep me from putting some blood, sweat, tears and lots of DIY and love into turning my bathroom into a beautiful new peaceful place just for me.  bathroom makeover after There are a couple of things that really make this an OMGosh! reveal. You probably couldn’t help but notice that gorgeous 48 inch Huntshire vanity topped with beautiful Italian Carrara marble… Huntshire bathroom vanity and the Talia faucet talia faucet I was immediately drawn to what the Huntshire description calls “straight lines and strong features”. I love the square basin with the traditional beauty, not to mention the size and storage (drawers and doors have soft closing hinges and slides!)…a place for everything and a big bold statement that this bathroom is finally not only truly functional but stunning as well! espresso bathroom vanity

More photos: DIY bathroom makeover I know you’re drooling over that lighting too, right? They’re the Monroe Polished Nickel Adjustable Wall Lights from LampsPlus DIYShowOff Bathroom Makeover

See something you like? Check out the source list with more details and pictures here

DIYShowOff Bathroom Makeover before and after

Does your blah bathroom have you wanting to borrow your neighbors? Do you have a vision for creating a spa-like oasis? How would YOU like a chance to win a DREAM BATHROOM MAKEOVER? Head over to the Virtu USA Dream Bathroom Contest page for more details on how you can enter to win! Good luck! dream bathroom giveaway Ready for some more bathroom makeover inspiration? Check out these awesome blog friends for more:

*This post is sponsored by Virtu USA. As always, opinion, photos, and words are my own.

How Wonderful Life is While You’re in the World – DIY sign tutorial

I think this lyric to “Your Song” by Elton John is the perfect accessory to the world map in our family room.  DIY sign

Materials:

  • Adhesive Vinyl – Happy Crafters
  • Transfer Paper
  • Scrap Wood Plank
  • Acrylic Craft Paint

Tools: Silhouette Cameo, scissors, gift card/credit card (for burnishing/rubbing), foam paint brush

Tutorial:

Paint scrap wood plank. Mine is is a 1×3 about 46 inches in length. Let dry. 

Using the Silhouette Studio software, I created my design utilizing “felt marker” font.  Silhouette design studio

Load the vinyl into the Silhouette Cameo vinyl side up and ‘send to cut’. Be sure to adjust the settings for vinyl. 

There are two ways to use vinyl as a stencil. If painting the letters, weed away the letters to create a stencil. I wanted to paint my sign (not the lettering), so I removed all of the negative part of the design, leaving the vinyl letters (like stickers). DIY sign tutorial

Apply transfer paper, sticky side down directly to the vinyl decal. Transfer paper ensures that everything is lined up properly when ‘transferring’. You could apply the vinyl in the same way you’d apply stickers, but keeping a straight line is a challenge!

Rub the transfer paper with a credit card or gift card to ‘transfer’ the vinyl to the transfer paper. Remove the wax paper backing.

Place vinyl (sticky side down) onto the wood plank. 

Rub with a gift card. 

Remove transfer paper (it may be a little tricky…I peel it away slowing, almost creating a crease in the transfer paper to get the vinyl decal to stick to the painted wood. 

Make sure all letters are nice and stuck. 

Paint the sign. I did a light coat using a sort of dry brush (foam brush) technique for a worn look. DIY wood plank sign tutorial

Before paint dries, carefully remove vinyl lettering.

Optional: sand and/or glaze for an antiqued, distressed look. Seal. Hang using picture hanging hardware or Command velcro strips. 

Perfect for a little Valentine sentiment, too. What song lyric would your sign display? How wonderful life is while your in the world. DIY Sign Tutorial

 

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  I really love working with this vinyl. Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

 

Easy Painted Patterned Accent Wall DIY

Earlier, I shared the pantry reveal and I’ve had a few questions related to one of the walls as to whether or not I used wallpaper.

easy painted accent wall

While I do love the look of wallpaper, I’ve had enough wallpaper removal to last me a lifetime so the answer is ‘no’. It’s paint! If you’re a long time DIY Show Off fan, you know that I am a big fan of using FrogTape® to create fun accent walls (see here, here, here, here) and with the addition of the Shape Tape, there are even more options for a creating a fun accent wall. I’d prefer to lightly sand and repaint than strip wallpaper in the future, wouldn’t you? painted Shape Tape accent wall

My wall is small. I used FrogTape and chevron Shape Tape to create a fun accent pattern with a tribal/Aztec feel. My lines were mostly “eyeballed”… but use a level and pencil if you’re more of a perfectionist.  FrogTape Shape Tape

I started at the bottom of my wall space and created straight lines with the Multi-Surface FrogTape and lined it up with the chevron Shape Tape to create stripes, zig zags and diamonds…no real planning out a pattern…I just got creative working my way about 1/3 of the wall (again, no measuring). FrogTape Shape Tape accent wall Shape Tape Accent Wall

Then worked my way down from the ceiling to about 1/3 of the wall space copying the same pattern I used at the bottom of the wall.

FrogTape Shape Tape application

Next I found the center of the wall and spaced out a similar pattern there to meet the bottom and top design. Since it’s the center, I didn’t feel it had to be a perfect match with the top and bottom pattern. I was right! It only adds to the uniqueness of the design. Here’s how it looked with the taping complete: FrogTape chevron Shape Tape accent wall

I actually painted the walls with my base color last April. It’s Valspar (Cool Grey). I didn’t want a loud bold design, so I used some leftover True Value Platinum (Old Fashioneda light blue/gray) from our kitchen walls as the accent color. 

Once my tape design was complete, I used a credit card to burnish the edges of the tape as I worked by rubbing the tape edge then painting the section. I only did one coat (again, I wasn’t looking for bold results and wanted the irregularity of one coat). This wall is bumpy in places so just doing a light colored pattern helps to take focus off of the wall’s imperfections.   FrogTape tutorial

As soon as I was finished painting, while the paint was still wet, I removed the tape. removing FrogTape

So within a 1-2 hour time frame, my wall had an awesome new ‘wallpapered’ look with a subtle design! Painted Pantry Accent Wall  

painted Shape Tape accent wall

I was going for a tribal or Scandinavian vibe. From a distance, it reminds me of writing paper. Remember it from grade school?

farmhouse pantry 

What I love about this: Cost for 1 roll of FrogTape and 1 roll of chevron Shape Tape is less than a roll of wallpaper! Use leftover paint!  It’s also less time consuming and less work – all for the same look as wallpaper without the headache to install or remove plus the option to personalize colors and design. 

FrogTape Blog Squad

Disclaimer: I received compensation to complete this project for using FrogTape® products. All opinions, projects and ideas are based on my own experience.

Sharing at Home Stories A to Z – Tips & Tutorials Party

Like what you see? Get reminders and updates delivered right to your inbox:

Enter your email address: 

Delivered by FeedBurner

Tips for Making a DIY Industrial Pipe Shelving Unit

I recently shared the open pantry before and after reveal and the star of that DIY ‘show off’ is definitely the industrial pipe shelving… Industrial Pipe Shelving  As a part of the January Creative Storage challenge for the Lowe’s Creative Ideas team, today I’m sharing a tutorial on what we did to use as tips for creating your own.

THIS IS LONG and sounds confusing BUT if you’re making one of your own, I think being detailed will help make the plan, design and build easier along with other tutorials and tips you may come across in your search for how to make DIY industrial pipe shelving. 

Getting started: The most difficult step (and not really that difficult when sketching a visual to help ‘build’ the correct size) will be your measurements and design. I’m no architect or artist, so my sketch is rough without fancy drafting software but it gets the job done and I was able to see where I needed to make adjustments. Start with measuring the space where the shelving will go. Length, height and width. I just drew the shelving (not to scale) on a piece of paper and labelled the measurements. Keep in mind that stock pipe comes in 12″, 18″ and 24″ pieces…any other size pipe will need to be custom cut/threaded (done by a Lowe’s associate). industrial pipe shelving plans

Understanding the construction: For 6 foot wide shelving, I wanted three supports for each shelf. Not enough support and the wood shelves may sag with weight over time. DIY pipe shelf construction  The pipe shelving frame is only connected horizontally by the wood shelving. Mine is only attached at the wall near the ceiling. I didn’t notice until assembling that my pipe cutting order was missing a piece so there should actually be another wall flange/pipe in the center top (and will be once I have more pipe cut). You could also screw it into the floor but we did not. It sounds as if it would be unsteady. Mr. DIY even had plans to add brackets for extra strength, however when installation was complete, even he was surprised by the how sturdy it is.

Each of the three built up/connected vertical pipe supports are individual and not connected to each other in any way. (Labeled on the left in the photo above as an example.)

Each wood shelf has three holes on the outer front edge (one on the left, one in the center, one in the right). Each shelf front is supported by resting on top of a tee in the front, threaded through a hole in the shelf with the vertical pipe. On the back, each wood shelf rests on an up-turned elbow. So each wood shelf is not anchored or screwed down in any way. It’s simply locked into place by the front pipe pieces through the holes in the shelf. Each shelf rests on a three tees in the front and three elbows in the back. 

My (vertical) measurements are rough but I knew that I had a 107 inch cap (the height from floor to ceiling) and could not go higher. Adding the measurements visually helps with adding up the numbers. I estimated my fittings (the flanges, tees and elbows to be 2 inches – they’re actually smaller but it gave me wiggle room in my design so I knew my shelving would not be higher than 107″ and coming in a few inches lower is ideal). The wood shelving thickness does not come into play because it doesn’t add to the height of the unit. On my drawing, starting with the bottom of the shelving unit, I drew in the flanges and the number 2 for 2″. Then, because of heat vent placement, I knew my first shelf needed to be above that. I drew in the 24″ pipes. Then a tee (2 inches), then my next pipe length 12″, another tee (2 inches), 15″ pipe to accommodate our microwave height, another tee (2 inches), another 15″ pipe, another 2″ tee, a 12″ pipe, a 15″ pipe, 2″ elbow. Adding those up, my rough shelving unit height measured at 107. Exact in theory, but due to the varying heights of flanges, tees, elbows and pipe threads when assembling, actual finished shelving unit height came in at 102.5″ (so, overestimating measurements in the plan ensures that shelving unit will not be too tall for the space).

Horizontal: My wood shelves are 20″ deep. As shown in the photo above, in the front the shelving rests on 3-way tees, in the back, it rests on an upturned 90 degree elbow. I chose 16″ pipes for connecting the horizontal 3-way tee to the upturned elbow. (Because the tee sits 1″ in on the 20″ shelf, measures 2″, then 16″ pipe, then a 1″ elbow totaling 20 inches, meaning once threaded it won’t touch/rub/scratch the wall. Keep the total horizontal support measurement shorter than the shelf depth.) For my top three horizontal frame supports (only 2 shown in photos for now), I added an inch (17″) to reach threading the wall/flange.

Horizontal pipe pieces:

  • 3 for each shelf (15 total for 5 shelves)
  • 3 for top of industrial pipe shelving frame 

Note: You may want to adjust pipe lengths to fit your own design. Maybe all one size or staggered shelving or a desk area. But once you understand the construction, you can customize each shelf’s height to fit your space. I used black iron pipe because the cost was a bit lower. Galvanized or maybe even PVC would work as well. All of my pipes and fittings are 1/2 inch. A Lowe’s associate made cuts and threads on pipes that were not an ‘in stock’ size. 

Shop: Make a list of plumbing supplies by counting up each tee, pipe, elbow and flange in your sketch.

Materials for a pipe shelving unit measuring 72 inches wide x approx. 102.5 inches tall x 20 inches deep. 

DIY pipe shelving plumbing materials

  • (6) flanges (be sure to get the correct fitting size for 1/2 pipe)
  • (18) 90 degree elbows (be sure to get the correct fitting size for 1/2 pipe)
  • (15) 3-way tees (be sure to get the correct fitting size for 1/2 pipe)
  • (3) 24″ pipes 
  • (3) 17″ pipes (custom cut/thread)
  • (15) 16″ pipes (custom cut/thread)
  • (9) 15″ pipes (custom cut/thread)
  • (6) 12″ pipes
  • screws and walls anchors
  • 7/8″ hole saw bit (perfect circle cut for 15 holes)

What we did:

Prep: First step will be to clean the pipes. Because oil is needed for the cutting process, they will be filthy, dripping with oil and there are likely going to be pieces of pipe that have that annoying super tacky glued price stickers protected by packaging tape that will need removed. Since I used iron pipe, I could not let the pipes soak in soapy water (they’d rust), so I used grease-fighting Lysol wipes, paper towels and lots of patience.

Paint: Next I spray painted all of the plumbing pieces Oil Rubbed Bronze. I did not use primer. Because I chose black iron instead of galvanized, scratches or poor coverage aren’t an issue.   spray painting pipes

Wood shelves: We cut 1 inch off of our 72 inch length so we’d be able to open the half bathroom door the entire way. This doesn’t affect anything. Decide where you want the holes (for the pipe supports) to be placed. I decided about 1 inch in from the front, 2 inches in from the sides. I created a template from a piece of cardboard. It looks like this: industrial pipe shelves tutorial

I simply lined up the edges of the cardboard with the left front edge of the wood shelf and marked my circle/cut mark with a pencil. Flip the cardboard and do the same for the right front edge. I measured the center of my 71″ length and pencilled in the circle/cut mark, lining it up with my template/stencil. I did this with each wood shelf. 

Cutting/drilling the holes: We drilled a tiny hole into the center of each penciled circle (made lining up the hole saw easier). We used the 7/8″ hole saw bit for perfect clean drilled holes. It made creating 15 holes all the same size a breeze! I lightly sanded and cleaned around the holes and our cut edge.

hole saw bit for pipe shelving pipe shelving tutorial

Because we have exterior wiring/conduit going up the wall behind the shelving, we had to create a notch on each wood shelf. We used our Dremel Multi-Max to to this.  pipe shelving

Staining and sealing each side of each wood shelf is the most time consuming part of the project. I love that Rust-Oleum’s Ultimate Wood Stain dries in about an hour. I only applied one coat…isn’t the color pretty? I did one side then flipped and did the other (the edges and inside of the holes too), applying with a foam brush and wiping off (rubber gloves and lots of rags are a must!). Watch for drips! Then I applied 5 coats of polyurethane to the top side (after this much work, you’re going to want to protect the finish on these shelves!), allowing to dry 2 hours between each coat. Again, watch for drips! No sanding between coats required. Once the one side was dry, I flipped the shelves and repeated brushing two coats to the bottom side, drying between each one.  staining wood shelves

Time for assembly! I was super nervous about this part. The size of the room did not allow for us to connect and lift the shelving into place. So we propped up the first shelf using a hamper and books and assembled in place. industrial pipe shelving assembly I can’t believe how easily and smoothly assembly went. I started by attaching flanges to the first three pipes. Then added a tee to each one. The tee should be placed in a direction with one opening facing up, another opening facing horizontal towards the wall. Next, attach a length of pipe (mine are the 17″ ones) to the horizontal facing tee. Attach an elbow at the end of the horizontal pipe. You’ll want the elbow to face up for supporting the wood shelf. assembling pipe shelving  Hold that piece into place under the hole in the wood shelf. Thread the next length of pipe vertically (So starting order at the floor is flange, pipe, tee, wood shelf then next length of pipe). Continue building the shelf in this way. We kept the bar stools and books for support until the very end of the assembly process and securing the shelving to the wall. 

Work with a level on the wood shelving to ensure everything is square and level. (Adjust threading as needed.)

The top: securing the shelving unit. After the last shelf is in place, add the last three vertical lengths of pipe. Add an elbow to each one. Add a flange to each horizontal pipe piece and thread into the elbow. The flange should be touching the wall (threads will allow for adjusting). 

Using a pencil, mark the wall where screws (into the flange) need to go. Our walls are plaster so we drilled pilot holes and added heavy duty wall anchors. If you designed your shelf to line up with the wall studs…you’re good to go.  Screw flanges into place. securing pipe shelving to wall  Sturdy. Beautiful! Ready to be stocked and decorated.  industrial pipe shelving tutorial at DIYShowOff.com My cut pipe Lowe’s order was missing one of my top custom cut pipes so our shelving unit is only secured into the wall by the two outer pipe configurations and it’s still sturdy! But I do plan to add the top center piece to finish/secure it properly. Industrial Pipe Shelving Closing thoughts: Whew! That sounds way too complicated and long, but I promise…I only wanted to include as many details as I could for your research into making your own.  I was so happy that it was easier than I anticipated. The hardest part – the design and again, by drawing it out one piece at a time, even that isn’t so complicated. Trust me, math is not one of my strengths. The most time consuming part – the staining/sealing or maybe it was removing the sticker goo. But the reward? A gorgeous custom shelving unit way better than any manufactured piece. Wouldn’t you agree?farmhouse pantry

DIY pipe shelving at DIYShowOff

See the entire pantry before & after reveal here.

More DIY ideas at Lowe’s Creative Ideas, follow Lowe’s on InstagramPinterest and sign up for the Creative Ideas magazine and app!   LCI

*Disclaimer: As a member of the Lowe’s Creative Ideas Creators and Influencers network, I received a Lowe’s gift card to complete this challenge. As always, all ideas and opinions are in my own words. The blog post above is what worked for me. Results may vary. Remember to work in a well-ventilated area and to take the proper safety precautions.

Links to more industrial pipe shelving:

Brick House pipe shelving

Have any questions? Let me know in the comments! Good luck!

Sharing at Home Stories A to Z

DIY Customizable Monogrammed Mirror Tutorial

Looking for a great gift DIY gift idea? Or some easy DIY wall art? Look no further! This framed monogrammed mirror is easy to do and easily customizable for swapping out colors and patterns. It’s perfect for those who love to decorate and easily changes to match any decor. One decorative accent, UNLIMITED looks! So fun!

One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

Materials:

  • Picture frame with glass – I purchased mine at TJMaxx but shop the house or thrift stores for an even better deal!
  • Krylon Looking Glass – Mirror Like Spray Paint
  • Vinyl letter decal, shape or silhouette – don’t have a Silhouette Cameo to do your cutting? Use a stencil and contact paper to create your own. Remember to ‘mirror’/'flip’ the design so that it doesn’t show backwards.
  • Scrapbook paper, wrapping paper {holiday/wedding/birthday paper for celebrating/gift giving would be cute too!}, book pages, maps, fabric…get creative! Cut to size to fit within the frame. 

Tutorial:

1. Create vinyl decal to fit inside of the dimensions of the picture frame/onto the glass. Remember to mirror/flip the design so that it doesn’t show backwards (vinyl will be applied to the backside of the glass). I used my Cameo to cut out a design on vinyl. Letter A for monogrammed mirror DIY

2. Disassemble glass from frame and clean the glass.  DIY monogrammed mirror tutorial

3. Apply vinyl decal to glass. I centered a letter “A”. You’ll be applying it to the backside of the mirror so you’ll want to “mirror” or flip the letter if needed so it doesn’t show up backwards. A shape or silhouette would be cute too! Example: monogram, dog, person, state, stag, word, etc. Monogrammed Mirror DIY tutorial

4. Follow instructions on Krylon Looking Glass can. Wear a respirator in poorly ventilated areas. Apply a light coat of the Krylon Looking Glass spray paint in a sweeping motion (starting off of the glass). Do this on the side of the glass with the vinyl decal.  One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

{zero degrees outside, spray painting in the basement – pardon the poor lighting!}

5. According to the instructions, repeat the above step four more times (only waiting a minute between coats – this stuff dries fast!). Then let dry one hour before handling. I did five coats and my glass still has a semi-transparent look which I like. Try more coats for a more solid look. 

6. Once dry, carefully remove the vinyl decal by lifting an edge using your fingernail or thumbnail or a vinyl weeding tool if you have one. Be careful not to scratch the mirror-painted finish (although scratches add to an antiqued/aged look).  One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

7. Cut scrapbook paper, book pages, fabric or wrapping paper to the same dimensions as the glass. Re-assemble glass and frame and insert scrapbook or wrapping paper in the same manner as framing a picture.  One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

All done! Include several shades and patterns of paper with your gift and let the recipient choose their favorite look to coordinate with their home.

One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

Cool, right? They’re going to love it and you’re going to want one for yourself!

Monogrammed Mirror Tutorial DIY mirror DIY mirror DIY mirror DIY mirror

You can’t tell from my pictures but the mirrored surface is very reflective. I just took my photos at an angle where you weren’t seeing me and my camera’s reflection in the glass. The mirror finish also has a bit of a worn/antiqued look that I love.  One decorative accent - UNLIMITED LOOKS: DIY Interchangeable/Custom Monogrammed Mirror Tutorial

Next up in the series is an awesome project from Amy at Positively Splendid!

For even more fun Krylon Looking Glass ideas, visit the entire series:

Friday -
http://www.infarrantlycreative.net
http://findinghomeonline.com
http://www.theshabbycreekcottage.com
http://sarahmdorseydesigns.blogspot.com
http://www.the36thavenue.com
http://www.eastcoastcreativeblog.com
http://lilluna.com
http://diyshowoff.com
http://www.positivelysplendid.com

Saturday -

http://tatertotsandjello.com
http://www.ourfifthhouse.com

Disclaimer: This is a post sponsored by Krylon. As always, all ideas, opinions and experience is my own. I first tried Krylon Looking Glass paint back in 2010 on an old window

Like what you see? Get reminders and updates delivered right to your inbox:

Enter your email address:

Delivered by FeedBurner

DIY Holiday Home Decor: Mirror Makeover

Give an existing mirror a new look for the holidays with a simple makeover and a frosted technique is perfect! The look without the shivers and frozen toes.

DIYShowOff frosted mirror tutorial

Materials:

  • Framed mirror
  • FrogTape®
  • Frosted Glass Spray Paint
  • Vinyl Decal

What I did: (pardon for the poor quality tutorial photos – this was something I worked on in the evening for a party the next day!)

Using FrogTape, I taped off the beveled edge of the mirror. I also liked the mirror’s metallic frame so I taped that off too. Using my thumbnail, I burnished the edge of the tape so that I’d have a crisp clean spray paint line.

FrogTape mirror

Apply a vinyl decal. I used a deer head I created using my Silhouette Cameo. You can use stickers or create your own decal from adhesive vinyl. If you’re artistic, try lining up strips of FrogTape, sketching your own design to cut out and apply to the mirror. 

mirror makeover

Spray one coat for a light frosted finish, more for a more solid frosting. I went with one light coat.

DIY frosted deer mirror tutorial

Remove FrogTape and decals.

Frosted Mirror Tutorial

Let the frost dry then display! Perfect for a winter wonderland themed mantel, don’t you think?

Frosted Mirror Christmas Mantel

I can use it from fall, Thanksgiving, winter and Christmas or even display it all year long. Wouldn’t a monogram be lovely?

rustic glitter Christmas decor

Do you spy the wooden chevron {ShapeTape} table runner? See how to make that here.

I shared a summary of my holiday home tour this week too – you’re invited to stop by!

See more of my Christmas dining room in photos today at 11 Magnolia Lane

11 Magnolia Lane open house  

and don’t forget to check out the blogger holiday home tours at

Deck the Halls Party

 

Eddy’s Christmas Tree for the Christmas Tree Contest

Eddy's Christmas Tree

FrogTape Blog Squad

Disclaimer: I received compensation to complete this project for using FrogTape® products. All opinions, projects and ideas are based on my own experience.