DIY Metallic Iron On Decal Tutorial

DIY metallic iron on decal tutorial @diyshowoff

I know, I know. I just shared a t-shirt tutorial a few weeks ago that I created for my sister but making up your own personalized iron on decals is so fun! Recently my blog buddy Julia from Cuckoo 4 Design (love her!) shared on her FB page the coolest t-shirt. It read “#BLOGGER”, however it’s only available in Germany so thinking along the lines of DIY (as usual), I decided to make my own for my August Happy Crafters project. They have a great selection of metallic iron on vinyl that I couldn’t wait to use.

DIY metallic iron on decal tutorial @diyshowoff

Materials:

What I did:

Open up your Silhouette Studio Design Edition software and create the text “#BLOGGER” for the front of the shirt. I also added “@DIYSHOWOFF” for the back of mine. Center on a 12×12 space. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Right click the text box to bring up the edit menu and select “flip horizontally”. You’ll need to mirror the text for cutting. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Load the iron on vinyl into the machine gold side down (back side up). 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Adjust blade setting for heat transfer and send to cut. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Unload from the machine and weed away excess vinyl. The silver/gold side will peel away from a tacky transparent side (your text will be stuck backwards to the tacky side). 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Smooth out the shirt onto an ironing board. Place iron on vinyl decal tacky side down in the spot where you’d like it to show on the front of the shirt. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Cover the decal with a cotton dish towel (or scrap fabric). Iron on high adding pressure according to the instructions provided with the Happy Crafters iron on vinyl. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Slowly peel away the transparency. If you notice that the vinyl hasn’t adhered, replace transparency and iron again applying more pressure. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Once transparency is removed, I replaced my cotton dish towel and ironed the lettering flat. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

Repeat the same steps for adhering the iron on vinyl decal to the back you may want to slide a piece of cardboard inside of the shirt first to prevent re-heating the front iron-on decal. 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

That’s it. I may have ironed mine on too high a temp so I have a sort of distressed look to my decal … which I love! So you may want to do a practice run/test to get it just right if you’re not a fan of the distressed lettering. Good luck! 

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

And…it coordinates with my black and gold polka dotted iPhone case. #stylish haha!

metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters metallic gold #blogger vinyl decal tutorial @diyshowoff #happycrafters

What hashtag would you choose for your shirt? 

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

 

 

Glitter Iron On Vinyl Decal Tutorial

Many of you have asked how my sister is doing and guess what? She’s finally completely “all done” with her treatments! Hurray! Confetti & champagne! My hero! And my hero’s superpower is “hope”…

DIY glitter iron-on decal tutorial at diyshowoff …and like most heroic milestones, it’s an occasion for a celebration, right?! Right! Well, that’ll be coming up in just a few weeks when we celebrate her birthday with a super-hero themed “Bobbi-fest” but in the meantime, I whipped up a cute breast cancer survivor shirt. 

What I used:

What I did:

1. Using my Silhouette design studio software, I created a design using text and a breast cancer ribbon, keeping the overall size in mind for a good fit on the shirt. 

pink glitter iron on - hope is my superpower breast cancer shirt

2. Right click each part of the design and choose “flip horizontally” to mirror the text and image. 

pink glitter iron on - hope is my superpower breast cancer shirt pink glitter iron on - hope is my superpower breast cancer shirt

3. Load the vinyl shiny-side (pink glitter side) facing down into the vinyl cutting machine. 

pink glitter iron on - hope is my superpower breast cancer shirt

4. Choose glitter/flocked iron on adhesive from the drop down menu in the cut settings. Adjust blade settings. (Always do a test cut first to ensure the blade doesn’t cut too deep or too shallow.)

pink glitter iron on - hope is my superpower breast cancer shirt

5. Hit “cut”.

pink glitter iron on - hope is my superpower breast cancer shirt

6. When cutting is complete, remove from machine and peel away excess vinyl. Weed away the vinyl surrounding the design. 

pink glitter iron on - hope is my superpower breast cancer shirt

7. Following the iron on’s printed instructions, I laid out the shirt on an ironing board and smoothed out the wrinkles. Place vinyl onto shirt.

pink glitter iron on - hope is my superpower breast cancer shirt

pink glitter iron on - hope is my superpower breast cancer shirt

8. Cover with a cotton dish towel or cotton fabric and iron, applying pressure 25-30 seconds and then moving to the next spot on the design and repeating. I used the highest setting on my iron (no steam).

pink glitter iron on - hope is my superpower breast cancer shirt

9. Slowly peel away the transparency. (If letters peel away too, repeating step 8, applying more pressure/holding a few seconds longer.)

pink glitter iron on - hope is my superpower breast cancer shirt

Ta-da!

Hope is my super power breast cancer iron on decal tutorial

Despite nausea and having tests done the same day, she agreed to model my handiwork. Isn’t she beautiful? {I love how despite not feeling 100%, she smiles. And how her hair is growing back with curls!}

breast cancer (hope is my superpower) - Bobbi at diyshowoff.com

Now that the treatment is behind her, she’s free to focus on recovering, building up strength and feeling better every single day. Thanks for your prayers! xoxo

Glitter is so difficult to photograph. It’s a more uniform and sparkly than shown above. 

hope is my super power

 

party pink bling glitter iron on vinyl

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Upcycled T-Shirt Tote Bag

This post may contain affiliate links.

Going green? It’s great to have reusable shopping bags handy. How about one that’s DIY, upcycled and customizable? All the better! 

easy DIY tshirt tote bag tutorial at diyshowoff.com

YOU CAN NOW SHOP AT MICHAELS.COM online! YES! Find a project, simply add the supplies to your cart or shop for similar supplies for your own spin, check out and begin your DIY project the day your materials arrive at your home! You can now purchase all of your favorite arts and crafts supplies on any computer, tablet or smartphone. You can also check out what’s trending on Michaels Pinterest page by scrolling and shopping through the “Favorite Pins” section. Free Shipping on $50+ at Michaels.com.

This upcycled t-shirt market bag project from Michael’s was the perfect inspiration.

ordering online at michaels

My take on the Upcycled T-Shirt Tote Bag

Materials I used:

  • short sleeved sport gray adult medium t-shirt
  • black parachute cord 
  • black distressed iron on letters
  • gray thread 

upcycled tshirt tote back supplies  

Skill Level: Easy

Project Time: 30-60 minutes

You’ll also need:

  • scissors
  • sewing machine (optional) 
  • needle
  • iron

Michael’s Coupons: 

What I did:

1. Start with a washed, dried, and ironed t-shirt then flip inside out. 

easy tshirt tote bag tutorial at diyshowoff.com

2. Next sew the bottom hem of the shirt closed using a sewing machine (you could also do this by hand).

easy DIY tshirt tote bag tutorial at diyshowoff.com

3. Cut off the sleeves.

easy DIY tshirt tote bag tutorial at diyshowoff.com

4. Cut off the neckline (squared).

easy DIY tshirt tote bag tutorial at diyshowoff.com

5. Flip t-shirt right side out. That easy – it’s a bag! 

The following steps are optional. Use your imagine to come up with your own creative take on it!

6. Embellish! I chose to use iron on letters (apply to t-shirt according to package instructions) but you could also decorate with fabric paint and/or stamps as shown in Michael’s instructions. 

easy DIY tshirt tote bag tutorial at diyshowoff.com

7. Cut two 12″ pieces of parachute cord and knot each end of each piece.

easy DIY tshirt tote bag tutorial at diyshowoff.com

8. Using a needle and thread or sewing machine, attach the parachute cord for bag ties between each of the handles (at one knotted end). 

easy DIY tshirt tote bag tutorial at diyshowoff.com

All done! Place near the door, ready to toss in the car for shopping.

easy DIY tshirt tote bag tutorial at diyshowoff.com

Cute, cute, cute! Love it! Easy to do with so many possibilities…love that kind of DIY, don’t you?  

easy DIY tshirt tote bag tutorial at diyshowoff.com easy DIY tshirt tote bag tutorial at diyshowoff.com

Michaels.com: Your 24-hour Arts & Crafts Store

I recently joined the Michael’s Makers team which means I receive a gift card to complete and share fun craft challenges.


Spring Bloom Pillow Cover

I’m still sort of holding my breath, hoping that spring truly has arrived after all of the teasing we’ve had recently. But regardless of the weather outdoors, I love to accessorize just a little bit with spring accents indoors. 

DIY Spring Pillow

spring pillow cover diyshowoff.com

Materials:

  • Accent pillow cover (make your own or purchase from Ikea or H&M)
  • Silhouette Fabric Ink Starter Kit from Happy Crafters – The Silhouette Fabric Ink Starter kit includes everything you might need to get started creating custom screen print designs. This kit includes: 2 oz. bottle of fabric ink in black, 9″ x 3ft roll of stencil vinyl, silhouette hook tool, mixing tray, sea sponge, foam brush, a download card worth up to 10 free Silhouette designs, an idea booklet and instruction guide, and an instructional DVD. With this kit, you have all the tools and materials needed to start creating all kinds of screen printing projects. Pair this with a Silhouette Cameo® or Portrait® vinyl cutter for designing and cutting graphics quickly using your stencil vinyl.

Silhouette fabric ink starter kit

What I did:

Using the Silhouette Design Studio Software, I created a spring design. There’s a promotional card in the starter kit for some fun free shapes but I created the text “Bloom” with a branch shape. 

Silhouette Design Studio spring bloom design

Load the tan stencil vinyl rough side up into the Silhouette Cameo. Adjust blade settings for vinyl cutting. 

Silhouette fabric ink tutorial

Send to cut then remove from the machine.  

Silhouette fabric stencil tutorial

Weed away lettering and shape from stencil. 

weeding vinyl fabric stencil

Peel away the white backing from the glossy transfer paper. Cover rough side of stencil with transparent transfer paper. Burnish using the plastic promotional card (or gift card). 

Silhouette fabric ink transfer paper tutorial

Peel away tan backing from stencil vinyl. 

Fabric Ink Kit tutorial

Place stencil onto pillow cover. Burnish using the plastic card. 

burnishing vinyl stencil

Peel away the shiny transfer paper. 

Happy Crafters Fabric Ink Kit tutorial

Paint design. I used a foam brush for the lettering and a sponge for the branch. 

painted pillow cover tutorial

Once paint is dry, remove stencil. 

painted spring pillow cover

Sew or glue pom pons onto the branches. 

Spring bloom pillow cover tutorial

Slip pillow into the pillow cover and display. Spring is in the air! 

Spring Pillow Cover at diyshowoff.com

 

spring bloom pillow at diyshowoff.com

 

spring pillow cover diyshowoff.com

 

See more spring ideas in the DIYShowOff project gallery!

spring DIY projects

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.  Check out all the supplies at Happy Crafters for inspiration for your next project. 

HClogopngsmall

Personalized Trick or Treat Bags

Trick or Treat is coming up at the end of the month. I sure do miss having little ones at home. We don’t even get trick-or-treaters in our neighborhood but I do have two nieces and one nephew, all under the age of 5. With help from FrogTape® and Happy Crafters, I whipped up a little Halloween surprise for them. They’re going to love these personalized trick or treat bags!

DIY personalized trick or treat bags

Materials: DIY personalized trick or treat bags

  • canvas/linen tote bags
  • fabric paints
  • FrogTape® Shape Tape (I used all 3 patterns: chevron, wave and scallop)
  • stencils (I created my own stencils using glossy black vinyl and transfer paper from Happy Crafters)

Tutorial: (please pardon the poor lighting…it’s raining today)

Part 1 – Shape Tape

Iron the tote bags to remove wrinkles.

Insert cardboard into the tote bag (to block bleed-through to the other side).

Cut a piece of FrogTape Shape tape a little wider than the bag. Decide placement. Remove half of the strip of wax paper backing from the Shape Tape. Position and press into place. Remove the other half of the wax paper backing and smooth into place. I found that securing the edges of the tape to the table underneath on the sides, kept my tote bag from sliding around, holding it in place for painting.

DIY personalized trick or treat bags

Repeat step 3 to create a ‘stencil’ border/line for the design. 

Using a credit card, I rubbed the Shape Tape to make sure it was nice and secure, sticking to the canvas…check closely to be sure the Shape Tape is complete adhered to the canvas. 

Paint! Be careful not to lift the Shape Tape with brush strokes. It helps to move the paint brush from ‘on the tape’ moving to the fabric rather than starting on fabric and pushing paint to the tapeline. 

Remove Shape tape. Nice crisp lines!!! Let the paint dry.  DIY personalized trick or treat bags

Part 2 – vinyl stencils

Using my Silhouette designer studio software, I created name stencils as well as purchased a few Halloween shapes from the Silhouette American online store. Then sent it to cut to create vinyl stencils.  DIY personalized trick or treat bags

Peel away lettering and design to create a stencil. Using transfer paper, position vinyl stencil on tote, rub with a credit card and remove transfer paper – leaving the vinyl stencil in place on the canvas.  DIY personalized trick or treat bags

Paint and remove vinyl. Allow paint to dry 4 hours. 

DIY trick-or-treat bags

*Using a black Sharpie, I traced around the ghost where his white body met with the white chevron. 

DIY trick-or-treat bags

Aren’t they darling? Years of use! Machine washable (inside out) after 72 hours. Cute.Cute.Cute! DIY personalized trick or treat bags

 

Now I have three little trick-or-treaters! Treators? What’s your favorite kind of Halloween candy?

FrogTape Blog Squad

*I’m a member of the FrogTape® Blog Squad. This post is sponsored by FrogTape®. As always, the opinions are completely my own based on my own experience. See more DIY from the FrogTape® blog squad.

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. See more projects at Happy Crafters blog.

HClogopngsmall

Silhouette Portrait Fabric Interfacing Tutorial

As a Silhouette America affiliate, I have the opportunity to try new products and earn a small commission on sales while passing along  special promotions. Here’s the current deal with awesome savings. Just use code “SHOWOFF” at checkout. blogger-promo-may-23

Did you know that Silhouette America has fun products like sewable fabric interfacing (thinner for sewing into place and washable) and clean cut fabric interfacing (thicker for no sew/no wash projects) for creating fabric appliqués?

Silhouette fabric interfacing

Here’s a tutorial on how it works: I chose the sewable fabric interfacing.

fabric interfacing tutorial

1. Pre-wash/shrink fabric and t-shirt.

2. Open the Silhouette Studio software and create a shape, monogram, even lettering for words. I easily purchased a ‘greyhound shape’ from the Silhouette online shop for 99 cents for labeling the pet food jars a while back that I can use over and over again. The little girl in me decided to create a pink chevron appliqué for a plain white t-shirt. For me. To match my dog. I’m a dork like that. ;)

3. It’s easy to size in the software. I place my shape in the top left hand corner of the “cutting mat” in the open studio software.

silhouette studio

4. Cut the appropriate sized piece of fabric and interfacing.

Silhouette interfacing

5. Next, iron together a piece the sewable fabric interfacing (rough side) to a piece of scrap fabric (cut to size) on the back/wrong side using the appropriate settings for the fabric.

ironing interfacing

{Wow! I guess I did get some sun in Mexico in Feb! I tan super easy/quick even with sunblock.}

6. Peel away the paper…you’ll see the ‘interfacing/glue’ has transferred to the fabric.

heat transferrable fabric interfacing

7. Then place the fabric onto the cutting mat (into the same location as shown in the Silhouette Studio software) and insert into the machine.

Silhouette cutting fabric

8. Hit “send to Silhouette”, change the blade and cut settings.

silhouette fabric blade

9. Click “cut”.

10. Once it’s finished cutting, remove the fabric from the cutting mat, toss the scraps and you’re left with an iron-on fabric appliqué.

SIlhouette applique

11. Next I positioned the appliqué onto my t-shirt and ironed it on (using the heat setting for cotton). This holds it into place.

ironing appliqueironing applique

12. Then added stitching as close to the border as I could get with the sewing machine to make it more secure and durable for washing. Tip to help maneuver curves in a design: with the needle down (piercing the fabric appliqué), lift the foot then slide around the t-shirt, put the foot back down and resume sewing. Also, make sure NOT to sew the front of a shirt to the back while sewing!

sewing applique

All done! Here is what it looks like inside out and all complete…

Silhouette applique inside outside

Cute! I love it. :)

Silhouette-greyhound-applique

Me & CocoRosie…

CocoRosie and Roeshel

Roeshel and Rosie

Yes, this little Italian Greyhound has stolen my heart in the 1 month since we rescued her…

DIY chevron greyhound applique

Note: I purchased the matching pink chevron dog leash (shown) and chevron dog collar (not shown) at Etsy shop, Learned Stitchworks. I loooove it (Thanks for the purple set too, Karen!) Gorgeous color choices, beautiful handmade quality, BEST pricing ever! Very satisfied customer. I need a set in every color, don’t you?

I purchased the (Riley Blake) pink chevron fabric from Fabric.com (leftover from the DIY dog bed cushion I made).

Back the fabric interfacing…It’s great for making personalized tea towels, baby blankets, tote bags, t-shirts, monogrammed pillow covers.

So not only does my Silhouette cut paper, vinyl and chipboard, it cuts fabric too! One more reason you can’t live without one! :)

Use code “SHOWOFF” at Silhouette America (this affiliate link) from now through May 31st to take advantage of the special pricing.

blogger-promo-may-23

And how about a chance to win a Silhouette Portrait machine?!

THIS GIVEAWAY IS NOW CLOSED. Winner is Benny who says “My son is getting married soon, I would make ‘bride’ and ‘groom’ appliqued t-shirts.” Congratulations, Benny! Benny has been notified by email to claim her prize. 

diyshowoff-silhouette-portrait-giveaway

Giveaway starts today, 5/23 and ends Monday, May 27th at midnight EST. Winner will be chosen randomly and announced shortly after. Prize: Silhouette Portrait machine (supplies not included). This giveaway is sponsored by Silhouette America and open to US residents 18+ only.

a Rafflecopter giveaway

For more chances to win, visit these blog friends:

His & Hers painted pillow covers

His & Hers Pillow Covers

I shared my painted upholstered chairs

Christmas sitting room with painted striped chairs

I also liked that the Serena & Lily chair {my inspiration for the stripe} had matching accent pillows.

Serena and Lily Bark Miramar Racing Stripe Chair

I just so happened to have 2 matching pillow cases on hand. What are the chances? I have had them just sitting in a basket in my craft room along with the other supplies. I love when DIY project was meant to be! {Chairs are actually a light grey and the pillows are a linen color…but they look so well together!}

His and Hers Pillow Covers tutorial

Materials:

  • FrogTape
  • two pillow covers
  • latex paint
  • acrylic craft paint
  • stencils

FrogTape-stripe-pillow-cover-tutorial

I measured the width of the stripes on the chairs and using FrogTape,I created the same stripe on the front of my pillow covers. I did insert a piece of cardboard to prevent paint from soaking through the back side. I filled in my stripe with the brown latex paint that I used on the chairs. I removed the FrogTape and let them dry. Then simply used stencils to spell out “His” and “Hers” (using an acrylic craft paint). I’ve read that you can set the paint with a warm iron.

I also liked that some of the fabric shows through for a worn look.

painted pillow cover

Awe…His & Hers

FrogTape painted striped Hers pillow

Now my chairs are complete! Christmas in the sitting room coming soon! :)

Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

*This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my experience. Results may vary. 

FrogTape Blog Squad

Painted Upholstered Chair Tutorial {before and after}

Painted upholstered chairs – story of an unplanned DIY.

Does your DIY ever go like this: I started my day with big plans to finally sew the curtains in the family room. In order to do so, I needed to clean off the dining room table which was piled with boxes filled with ornaments and holiday decor and other junk from the shuffling around, rearranging and decorating {because of course the table in my craft room is piled high with an unorganized cluttered mess that also needs cleaned}.

DIY painted upholstered chair tutorial

Of course clearing the dining room table meant decorating for Christmas which lead me to the room right off the dining room that we’re currently calling the “sitting room”. So, in order to sew curtains for the family room, I had to clean the dining room which meant decorating the sitting room and in there were these chairs.

These $6 thrift store chairs. I loved the color and pattern. But I have had a difficult time with orange, fuchsia and olive green colors. Love them. But they don’t work in our home. I gave them a chance, but not even in our eclectic home. I considered slipcovers but I am decorating this room right now. No materials or time for slipcovers.

{before}

chair before

And I had the brilliant idea to paint them. Right then. That minute.

I had seen the upholstery painting tutorial at Hyphen Interiors in 2011. Loved it. Left an impression. Very inspiring.

I also knew I had most materials on hand. Paint! Everything except the fabric medium. I’ve looked at the bottles for sale at Michael’s in the past {for painted curtains} and knew they weren’t cheap. I was also still in my pajamas and on a mission. Sewing curtains, remember?! But these multi-colored chairs were an obstacle.

DIY girls thoughts: No fabric medium. No budget. No desire to run to the store. Lots of leftover latex paint. The only one who really sits in these chairs is the cat. So for now…if painting doesn’t go right, I can still slip cover them at a later date. GO FOR IT!

I found a left over can of Ralph Lauren paint that I hated working with as it was super watery. Perfect! I watered it down even further with water. I didn’t measure, just created a consistency that was still able to hold to the paint brush but watery enough to be absorbed into the textured fabric of the chairs. I used a 2.5 inchPurdy brush.

I gave the chairs a good cleaning, getting up all of the cat hair (FrogTape works great as a cat fur remover).

And I just started painting. My mixture of latex and water had amazing coverage.

I also taped off the legs using FrogTape.

painting upholstered chair

Sometimes I had to swirl the brush for coverage, then followed up with a straight brush stroke.

painting upholstery

And worked my way along the bottom edges, up the side, around the back, in the creases of the attached cushions and finished by painting the seat back and cushion.

painting an upholstered chair

I took a few breaks and a bigger one between the painting the two chairs. The Paintbrush Cover was perfect for keeping my paintbrush from drying out. It creates an airtight seal during usage. Simply place the brush in the cover and close the lid. After my break, I simply opened the cover, removed my brush. It was like I never stopped painting! {Thanks to Salvatore of the Paintbrush Cover for the gift…definitely something that’s going to get a lot of use around here. If you paint a lot…visit the link above to purchase a few for yourself. Definitely useful and convenient! 2 must have DIY paint tools to have on hand: FrogTape and the Paintbrush Cover.}

The Paintbrush Cover

One coat. It dried fairly fast. I removed the FrogTape which perfectly protected the wooden legs. Who even noticed those pretty legs with that crazy printed fabric before? Discovery: She has legs with beautiful carved detail!

removing FrogTape

The texture which was lost in the busy pattern…

before

upholstery before

now shows the quilted pattern with a solid color…

after

painted upholstery after

SO PRETTY!

And before you ask, yes…without the fabric medium, my chairs are rough. They have a vinyl look and feel. Since the paint is watered down…it’s not going to crack or chip or anything. The paint is absorbed into the fabric. I would recommend NOT skipping the fabric medium and to use the recipe shared by Hyphen Interiors. However…if you find yourself in a DIY emergency like me and aren’t particular about a sort of vinyl look/feel. And you have to do something or your entire Christmas decorating is going to be a big fail and you’ll never move on to the project that you planned to complete in the first place…I must tell you, I love these chairs now. Forget the slipcovers.

I knew I wanted to do more than just have a set of solid light grey chairs. My inspiration:

Serena & Lily Bark Miramar Racing Stripe Chair

Serena and Lily Bark Miramar Racing Stripe Chair

Of course I know that my chairs aren’t the same shape. They’re slender girls with long legs. But that stripe. I love that stripe. Not quite a knock off or copy cat project, but it’s what inspired my next steps…

I found the center of the chair and using FrogTape, created a stripe down the middle. I was sure to burnish the edges where the tape would meet paint. And using  leftover {watered down} brown latex paint, I painted in my stripes from bottom of the front of the chair, over the cushion, up seat back and down the back of the chair.

FrogTape stripe

I removed the FrogTape while the paint was still wet, pulling away from the wet paint. I did take a wet paper towel to carefully wipe away wet paint where a tiny bit seeped under the tape due to the texture of the fabric. See – it’s a good thing I have that vinyl-ish finish!

Removing FrogTape Stripe

Amazing transformation, right? Love it!

striped painted upholstery

Now I’m happy with my $6 chairs.And I was able to decorate the sitting room for Christmas.

See more Painted Upholstery Chair pictures in the sitting room mini makeover. 

painted upholstered chair tutorial

His & Hers painted pillow covers

painted pillow cover

{tutorial}

His and Hers Pillow Covers tutorial

I was able to get the dining room table cleared off and decorated and the clutter put away. (okay…for real, some of that was shifted to the craft room table which is dangerously close to an avalanche. Shhhh!)

I still haven’t sewn 6 of the 8 family room curtain panels. {Remember the no sew ruffled ombre tree skirt and the sewing machine being at the repair shop? One of these days I’ll get those curtains done. You don’t remember that I’ve had the fabric since June, do you?}

Perhaps another day, I’ll have a DIY plan that will go according to plan.

Joining the party here:

shabby creek cottage Beneath My Heart

 

Don’t miss a thing!
Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

*This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my experience. Results may vary. 

FrogTape Blog Squad

How to turn a coffee table into an ottoman ~ Inside Out Design

Brooke from Inside Out Design is sharing how to turn an old coffee table into a tufted ottoman. It takes a little work, but transforming an old coffee table with some foam and fabric can make add a beautiful element to your existing living room space. I do have an old coffee table hanging out in the basement and Brooke’s tutorial is an inspiration!

Brooke’s coffee table is actually pretty cute with a painted stencil design but she felt the height was wrong for her couch, wanted to add a beautiful designer fabric to her living room (sometimes throw pillows aren’t the answer) and having a comfy place to prop feet is always a bonus. I know I’m always propping my feet up onto a glass coffee table and it’s not ever comfortable. ::envisions of basement coffee table with a new look and coffee foot prop::

painted stenciled coffee table

Quick summary:

To adjust the height, Brooke and her husband cut (and painted/distressed) the existing lets and reattached them.

distressed coffee table legs

Next, they added a frame so that it’d look more like an ottoman and less like a coffee table. The new wooden frame will support the new upholstery and hides the drawer.

ottoman frame

A little math for spacing and a chalkline create a grid for drilling tufting holes…

ottoman tufting holes

They ordered pre-cut foam (awesome! see original post for details) and attached to the wooden frame using spray adhesive.
Add batting by stapling to the wood frame…
then fabric…
What a transformation! It looks good just like this…
But of course, tufting makes everything better. Brooke made up some buttons with the fabric and created some tufts (link to tutorial below). The final result is stunning and a beautiful addition to her living room!
tufted upholstered ottoman Isn’t it gorgeous? Repurposing the old coffee table was a genius idea! And what a beautiful home surrounding it!

You can get the full details at Inside Out Design:

Part 1 – Turning a coffee table into an upholstered ottoman

Part 2 – Upholstered ottoman tufting tips

Another coffee table turned upholstered ottoman tutorial HERE. DIY upholstered tufted ottoman tutorial

 

and more DIY coffee table ideas.

Tiffany & Co. spray painted steamer trunk

Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

How to Upholster a Headboard ~ The Sweetest Digs

Every single time I see an upholstered headboard, I’m tempted to repurpose our existing furniture so I can DIY one myself. Today Gemma from The Sweetest Digs shares her DIY headboard tutorial.

Tips on How to Make an Upholstered Headboard

Gemma’s poor pillows on her “before” bed had no where to lean or rest…

no headboard

Easy, affordable solution? A DIY upholstered headboard of course! Here’s how she did it…

She purchased her fabric and batting then had Home Depot cut her 1/4″ plywood to the right size (using measurements for her bed).

She laid out the batting on her dining room table.

batting

Next she laid her plywood in the center and stapled the batting to the backside.

batting on plywood

Next, she ironed her fabric and laid it out on the dining room table…

fabric for headboard

She laid her plywood in the center and stapled the fabric (starting with the long ends)…

stapling DIY headboard

and ending at the corners…

stapling corners

It’s hanging in place using French cleats (shown here).

Ta-da! Seriously, she made that look so easy, didn’t she? Who knew it was THAT simple and the result? Stunning! The best part? Total cost: $98! Woo hoo! Thanks so much for sharing, Gemma!

DIY upholstered headboard

Love it! A beautiful inexpensive way to accessorize with color and pattern! See the full original post with more detailed instructions {and more DIY from Gemma} at

The Sweetest Digs

DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - Feed


What’s all the HOOPla? DIY Hoop Art Tutorial

My friend Amanda from

Mommy is Coocoo

created  a wall of beautiful art using embroidery hoops and pretty fabrics. Super easy and affordable do-it-yourself to fill up an empty wall space. So many options for making a design for a custom color palette and space.

Materials:

  • Fabric fabric scraps
  • Embroidery Hoops embroidery hoops

Tutorial:

  • Simply stretch fabric in embroidery hoops, trim to size and hang. Amanda recommends not putting a whole lot of thought into it. Sometimes a random surprise is the best plan.  fabric hoop art tutorial

Wall before:{naked!}

bare wall

Wall after:

hoop art tutorial

Fun, colorful, affordable, super quick and easy wall art that makes a big beautiful statement!

hoop and fabric wall art

embroidery hoop wall art

See more creative DIY (and more!) from Amanda at Mommy is CooCoo!

 



Awesome Easy Tutorials from Punkin Patterns

I‘ve been watching Vanessa at Punkin Patterns make over her daughter’s room.  She has some tutorials for a few easy DIY transformations.  I haven’t given these a shot myself but click the links to see all of the details. She makes everything look so easy and results are awesome!

DIY Wall Mural

DIY Fabric Vinyl Wall Art (free tiara and frog prince pattern too!)

Bookshelf Facelift

Before

After

Fabric Photocopy Transfer Dresser Makeover

Before

After

Notice a theme going on?  Vanessa has creative tutorials inspired by her favorite fabric.  I’m addicted to pretty fabric, hate to part with it sometimes!  But even a small leftover piece can work for Vanessa’s awesome tutorials.  Head over, check it out!

Punkin Patterns Button