how to tuft and upholster a headboard

Tufted Upholstered Twin Headboard Makeover

Ali needed a twin bed for her apartment. She wanted a neutral upholstered headboard with tufting.These were perfect for what she had in mind, except the $250+ price tag was not in her budget.

inspirationwest elm diamond tufted headboard

West Elm Diamond Tufted Headboard in sand

bellacor tufted headboard

Bellacor tufted twin headboard in premier oatmeal

We were up for the DIY “get this look for less” challenge. We found this vinyl covered gem at a second hand store… {$20 including the bed frame!}

beforeupholstered headboard before

What we used:

  • old headboard
  • batting
  • fabric covered button kit
  • drop cloth
  • fishing line
  • FrogTape
  • staples & staple gun

Once I got the headboard home, I discovered that the headboard itself was not solid. There’s only a wood frame covered with vinyl. It’s hollow. Darn. But we moved forward, fingers crossed.

First step was to determine where the buttons for tufting would be placed. I created a grid on the back of the headboard using FrogTape.DIY headboard marking for tufts

Since marking black vinyl is a little tricky, the Frogtape helped to mark the areas I wanted to drill a hole…drilling headboard

I removed the FrogTape but it won’t hurt to keep it in place.

Next, I rested the headboard on top of a piece of batting and cut batting big enough to wrap around the edges onto the back side. You can use spray adhesive to help hold it into place.

Staple batting onto the back side of the headboard. stapling batting onto headboard

This is how I wrapped and secured the corners: by pulling the corner of the batting over the corner of the headboard, stapling, then folding and stapling the long edges of the batting. It was a little tricky around the leg of the headboard, just make sure batting lays smoothly.upholstered headboard corners

Carefully trim away the excess batting…trimming batting

Here’s how it looks from the front: upholstering a headboard

While I covered the back of the headboard with sheet of drop cloth measured and cut to fit the back side using spray adhesive to hold into place then followed the same steps above with the drop cloth fabric…DIY upholstered headboard

Ali covered buttons using dropcloth scraps {she’s less than thrilled about the photo op. lol}…covering tufting buttons

To create tufting with, use a finishing nail to hold the fishing line in place. To keep it from going through the drilled hole, place the nail through the loop in the thread. Lay the finishing nail across the back of the hole and loop the thread over the nail and back up through the hole. Repeat a few times and then tie off the thread to the finishing nail. Twist the nail to draw the button down into the fabric to the desired depth. Use a staple gun and staple diagonally across the nail to secure it and keep it from unwinding {more tufted button instructions at wikihow}.tufting an upholstered headboard

Before and After…

before and after headboard

Total cost of DIY: less than $50!

DIY tufted upholstered headboard makeover

You might also like:

Stay tuned for more on the apartment decorating and reveal!

Facebook
DIY Show Off - FacebookDIY Show Off - TwitterDIY Show Off - PinterestDIY Show Off - FeedDIY Show Off - HomeTalkDIY Show Off - G+

This is a sponsored post brought to you by FrogTape. The opinions are completely my own based on my own experience. 

FrogTape Blog Squad
Sharing here: Transformation Thursday at The Shabby Creek CottageHome Stories A2ZDIY Show Off

9 thoughts on “Tufted Upholstered Twin Headboard Makeover

click to read what friends are saying...


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.